Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Picked up another Philco 37-650
#1

I picked up another radio it’s a Philco 37-650. The cabinet is in pretty good condition, but the chassis is in very bad shape. Looks like the chassis sat in water for quite a while. No sign of water on the cabinet. So I’m guessing is it’s not the original chassis, speaker is trashed too. I took some pictures of the chassis.

[attachment=20339][attachment=20340][attachment=20341]

Do you think it’s worth trying to repair, or should I try to find a replacement?

Philco 41-295X 4 band radio.
I'm 67 years old, in north Idaho.
#2

I would try to find another chassis.
It could be repaired but the effort will be way more significant than usual. Judging by a very sad look of the underchassis, many coils would be open, many wires would need replacement, and it is even conceivable that the whole assembly would need to be dropped and the chassis chemically cleaned and re-plated first.
Personally I am not a big fan of it.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#3

+1 Mike
Sometimes after doing a bunch of work you can still have odd intermittent issues. That by the time you get it all sorted and buy a "parts" chassis you're better off w/another chassis to fix.

I've got an old Hallicrafters S-11 from 1936. Originally was a nice set and has p/p 6L6's for the audio output. I got cheep. From panel looks good and has all of it's knobs BUT the insides and bottom RUSTY! Haven't quite decided what I'm going to do w/it.
Here's one on YT not mine and as been hacked w/a S meter.  https://www.youtube.com/watch?v=KXTafja70BY  Should just have an eye tube.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#4

Thanks for the reply’s, I have to agree I need a new chassis, will start looking around to see if I can find one. Mean while, I will restore the cabinet.

Philco 41-295X 4 band radio.
I'm 67 years old, in north Idaho.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Electrolytic restuffing/internals
I just taped the two pieces of the cap together, but I can see your method is better. I just held the lead in with solde...bridkarl — 08:18 PM
Electrolytic restuffing/internals
hello bridkarl, Well done ! Here is a Photo of the base of Philco capacitor that I cut open you can see how I glued th...radiorich — 08:14 PM
philco predicta
Hi CGL18, Here is a link for the schematic from the Early television Foundation: WARNING!! One side of the Chassis i...MrFixr55 — 08:09 PM
The list of my radio & TV collection!
Peter; I like Canadian General Electric sets, whilst the model numbers are often the same as their U.S General Electr...Arran — 05:44 PM
Electrolytic restuffing/internals
Did as suggested. Cut can with hacksaw, removed internals, attached new 8mf cap - with ample use of cardboard and elec...bridkarl — 03:36 PM
The list of my radio & TV collection!
For fans of antique radio... My new video... How to test radio tubes on a Hickok 530B tube tester? Test radio tubes o...RadioSvit — 01:25 PM
philcorepairbench.com - shadow-meter
Thank you Billpoulsbobill — 11:53 AM
philcorepairbench.com - shadow-meter
Hi, Try here Philco Service Hints & Tips, Number 1 It's from the web archive (Way Back Machine).Keith — 10:17 AM
PT-6 finished!!
Hi Arran,  Yes, you are correct, the "nominal" voltage for these Loctal tubes was the same 6.3 or 12.6 V as...MrFixr55 — 07:48 AM
PT-6 finished!!
Actually the Loctal tube series, with number beginning with "14" are 12.6 volt tubes, at 150 ma, I'm not sure ...Arran — 02:14 AM

[-]
Who's Online
There are currently no members online.

>