[Jimradio]

Hi guy's, on the schematic for alignment it shows using a .1mf (uf) and a 100mf (uf) for dummy antenna. I don't have a 100uf cap except an electrolytic type. What can I use instead of the 100mf.

Thanks

[Radioroslyn]

Methinks you missed a m it's 100mmfd.

[gregb]

+1 What Terry said

Gregb

[Jimradio]

Thanks guy's for your reply. I did use the 100pf, but the schematic actually shows 100mf and so did other models I checked. However the later ones (models) show 100mmf. I think they must have had a miss print on some of the early models.

Thanks again..........
Jim