Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Zeinth Upright with record player
#1

In about 1949-1950 my Dad bought a Zenith Upright with record player, it had the drop down door in the front like a drop front desk, the phonograph had two tone arms, one red and one green one for 78s and one for 33 1/3 records, both looked like snakes. It had criss cross flat brass for the speaker grill.
We used to listen to a guy read the comics on Sunday morning on that radio. Icon_biggrin
Any ideas on which model this might have been and anyone have pictures Icon_confused:
Thanks
#2

1949 sounds about right, Philco was also making phonographs with two tonearms that year (one for 78, the other for LP). I think by 1950, manufacturers were making three speed phonographs with a single tonearm?

That Zenith tonearm was called the "Cobra" because of the snake head design. Later Zenith record changers with single tonearm were called "Cobra-Matic."

There is still a TV shop in town here. Up until before Christmas they had an old, early 1950s Zenith entertainment center in their store window with a TV, AM-FM radio and Cobra-Matic changer. Don't know if they will put it back in their window after the holidays or not.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM

[-]
Who's Online
There are currently 1914 online users. [Complete List]
» 4 Member(s) | 1910 Guest(s)
AvatarAvatarAvatarAvatar

>