Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Unboxing 2 Forgotten Radios on YouTube
#1

Today, I open up 2 boxes containing radios unopened and forgotten about for 6 years.
Lets open them up!
If interested link below
https://youtu.be/Uf9bHYC4Dko
#2

Neat video Icon_clap 

Steve

M R Radios   C M Tubes
#3

Thank You Sir
#4

Nice video.


I was wondering about that variac staying hot but then I figured since you posted that video, nothing bad happened Icon_smile

One thing: I am not sure but it seems like the spray said "contact cleaner". If it is, I wouldn't use it on a pot, as at least some are known to etch the resistant off of the omega. Fader lube, like Deoxit F5 is safe and does a good job removing scratchinness from volume controls.

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#5

I forgot to turn the variac off, good thing the radio was off, haha
#6

o man, is that all there is??? Icon_e_biggrin
#7

Fun video Buzz, thanks   Icon_thumbup

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#8

Thanks Buzz.
I always enjoy your videos.

Can't think of anything witty.
Greg O.
Whitehall, PA




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM
Philco model 38 code 121 not receiving signal.
I think this thing is way more accurate than my Walmart DMM. :DStormlord5500 — 08:19 AM

[-]
Who's Online
There are currently 1284 online users. [Complete List]
» 2 Member(s) | 1282 Guest(s)
AvatarAvatar

>