Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Early Auto-radio Model-N ??
#1

I am working on an early Ford car radio. 1933-1934. The radio has no visible identification. Web searching I was able to come up with the designation of Model-N. The photo and description provided match what I have. Also, it is identified as a Glove-box radio in my searches. I have attached a photo.

I am looking for verification of my information and I am asking for any input concerning schematics or other useful service information.

Thank you, Dave KB7GP


Attached Files Image(s)
   
#2

I may also be barking up the wrong tree here. I have a second designation located as a Zenith 5604. No photos were found using that info.
#3

Set looks in good condition for such an early model say 1932-1934
#4

dave
you have a 1933-34 zenith ford-lincoln radio http://www.nostalgiaair.org/pagesbymodel...006385.pdf

the model N mounted on the firewall over the steering column and had a separate tuning head in the dash.

see also https://www.radiomuseum.org/r/ford_ford_lincoln.html

google had a site that showed most old ford radios but it seems to be down.

https://sites.google.com/site/identifyingcarradios/home

i have instructions somewhere for disassembling it. let me know. common sense, mostly. also let me know if you're able to touch up the crinkle finish. to look original. rustoleum textured paint isn't even close.
#5

Hi there everyone,
We're basking in+20 C. weather here in the Southern Hemisphere.
Reading your request for information on this radio rang a bell for me.I have recently taken delivery of a  good book "The Auto Radio - a Romantic Genealogy " by Donald Matteson.The picture of the set you are enquiring about is ,to me , strikingly similar to the illustration on page 119 of that book showing a 1933 Ford dashboard  "showing the famous  Glove Box radio". However Mr. Matteson identifies it initially  as a Grigsby -Grunow. But according to the text the first 25,00 of these were built by Grigsby- Grunow but toward the end of 1933 this company filed for bankruptcy leaving Ford needing another 30,000 units ,whereupon an order was placed with Zenith to produce the balance.So , I guess, depending on whether yours is an early or late set  it could be,if Mr. Matteson is correct,either a Grigsby -Grunow or a  Zenith.
If I were more computer literate I would attempt to post a copy of the illustration on line.Maybe my granddaughter will be able to help


Attached Files Image(s)
   
#6

Hello David! This is a first for me. I just commented that us "northerners" are only 20 days away from Spring. At the same time I can also say it's 20 days away from Fall! Take care and BE HEALTHY! Gary

"Don't pity the dead, pity the living, above all, those living without love."
Professor Albus Dumbledore
Gary - Westland Michigan




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Restoration of the Canadian General Electric A-87
Ok.... In the fourth year of the war, I still decided to return to an active hobby. For more than three years, I did not...RadioSvit — 10:43 AM
Philco 37-116 Cabinet Repair
You'll probably have to get quite a large amount of wax filler, those are some big gaps, and both sides. Nice summer pr...RodB — 10:38 AM
Philco 37-116 Cabinet Repair
Hello everyone. I completely agree with Richard and Dan - in this case, without replacing the veneer, only a wax filler ...RadioSvit — 10:07 AM
Philco 37-116 Cabinet Repair
I have used Timber Mate Timber mate is a grain filler  . You can get it in different colors,so it will be close to...Dan Walker — 09:51 AM
Help with Supreme 599
The 300 ohm line adjustment is used to set the primary of the transformer to a nominal voltage for any line voltage from...DaleHCook — 09:22 AM
Philco 37-116 Cabinet Repair
I think Arran is correct about the substrate expansion. I'm going to give the colored wax a try.dconant — 08:11 AM
Philco 37-116 Cabinet Repair
Hello Guys, What I would do is get  colors of wax filler and fill in the void ! Sincerely Richardradiorich — 12:41 AM
Philco 37-116 Cabinet Repair
It looks to me like the structure under the veneer may have expanded from humidity cracking the veneer on the surface. W...Arran — 09:42 PM
Help with Supreme 599
Iam only getting 4vac out of the tranny For the 80 filament. The line rheostat Looks fine and the tranny is getting 11...daveone23 — 08:45 PM
Rogers Majestic R-646
Transformers rewind? It's very easy! If you don't have round eyes  8-) Vlad95 — 01:55 PM

[-]
Who's Online
There are currently 1130 online users. [Complete List]
» 3 Member(s) | 1127 Guest(s)
AvatarAvatarAvatar

>