Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Simplex model H AC
#1

I have owned a Simplex model H AC (circa 1931?) cathedral radio since the late 70's. Power cord is missing as well as the tubes, (3) 24's, (1) 45 and (1) 80. Front bezel surrounding tuning thumbwheel says "Clearcut", possibly a private label brand? Any info you can shed on this radio? I have photos I can email if anyone is interested. Thanks
Radioman1950
#2

Radioman,
Check this out at the Nostalgia Air site: http://www.nostalgiaair.org/PagesByModel...018419.pdf
#3

Hi
I've got a couple of Simplex sets myself. Simplex chassis anyway. Seems like they got renamed and rebranded alot. Here's one of them it's a little newer than your set.
http://www.flickr.com/photos/53710524@N0...hotostream

Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#4

Here's the other one. http://www.flickr.com/photos/53710524@N0...hotostream

This one is up and running. Picks up station pretty well considering the low budget circuit
Terry

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#5

I was trying to get one of those little cathedrals myself. Know of one for sale, but the either the guy wants to bundle it with a crumbling console or the price keeps going up. Last time I checked the price was $200 for it and it's missing a tube. I like them and will pounce when I find a fair priced one. Icon_smile

No matter where you go, there you are.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM

[-]
Who's Online
There are currently 1835 online users. [Complete List]
» 2 Member(s) | 1833 Guest(s)
AvatarAvatar

>