Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Source for speaker grill cloth for model 70
#1

I was looking for a source for original speaker grill cloth for my model 70. I just checked out radiodaze but was horrified to see that they are discontinued. Does anyone here know of a good reliable source to find a replacement that mimicks the original?

tractorforum.com *** I reserve the right to be wrong
#2

No kidding? I'd hate to have to buy something from a Ben Franklin or Good Will. Hmmm.l

tractorforum.com *** I reserve the right to be wrong
#3

Holy crap guys. What's with all the DISCONTINUED?? That is scary. Guess I've been away for a little while Icon_confused

http://www.radiodaze.com/category/290.aspx

-Brian
If you collect or are interested in antique telephones, please visit Classic Rotary Phones
http://www.classicrotaryphones.com/forum/index.php
#4

Here's the story.

http://www.philcoradio.com/phorum/showth...p?tid=3606

--
Ron Ramirez
Ferdinand IN
#5

Look at ARS http://www.tubesandmore.com/

Pattern S-G431F might be as close as you can get (now).

"I just might turn into smoke, but I feel fine"
http://www.russoldradios.com/
#6

Those on-line pictures at ARS are hard for me to relate to the actual pattern because they're not very sharp. I have a sample of almost all the clothes but ARS uses a different # system than Grillecloth.com and RadioDaze so I can't really tell much about S-G431F.

My recommendation is to try and salvage the original piece or just find something that looks decent for the time being. Eventually a new source will be found and that Philco pattern along with some popular Zenith patterns should be among the first to hit the streets and you can replace it then.

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#7

Eliot Ness Wrote:Those on-line pictures at ARS are hard for me to relate to the actual pattern because they're not very sharp. I have a sample of almost all the clothes but ARS uses a different # system than Grillecloth.com and RadioDaze so I can't really tell much about S-G431F.

My recommendation is to try and salvage the original piece or just find something that looks decent for the time being. Eventually a new source will be found and that Philco pattern along with some popular Zenith patterns should be among the first to hit the streets and you can replace it then.
The one in place now is fine, t's just not even close to the original, and looks a bit drab. I'll figure something out, or just wait until someone else picks up the torch!

tractorforum.com *** I reserve the right to be wrong
#8

No source right now but hopefully again soon, if not someone else will have to step up to the plate.
Regards
Arran




Users browsing this thread:
[-]
Recent Posts
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM

[-]
Who's Online
There are currently no members online.

>