Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco 37-89
#1

Hi All...
This is my first post and I'm looking for some information on a Radio that I got. It's a Philco Model 37-89. I'm ultimately looking to sell it, but I'd like to learn more and perhaps a range to ask for it. It does power up and I'm able to tune in 2-3 channels...Any info is appreciated.
#2

Value depends on the radio's condition, both cabinet and chassis/speaker. If the set is original do not recommend that you turn it on again,as 70+ year components are not reliable and if they go they may cause other difficult parts to be ruined.

Recommend you go on eBay to completed auctions to see what others have been willing to offer for your model.
#3

Hi Ra5451

Which version of the 37-89 do you have? Cathedral (rounded top), tombstone (flat top table model), or console (floor model)?

Can you post or furnish photos?

Agree with TA's suggestion about checking eBay prices, but keep in mind that sometimes eBay prices can be inflated over "real world" prices.

--
Ron Ramirez
Ferdinand IN
#4

Here are some pics...Its a flat top unit...


   
   
   
   

#5

The finish is wrong. Looks like stain was used and the original photo-finish has been stripped off.

The price you are asking for it in ebay is too high.

http://www.ebay.com/itm/Vintage1937-Phil...46030ddc21

In it's current condition it is probably worth 40-60 dollars.






#6

TA...thankx for the info...I know nothing about these radios...
#7

Not to mention wrong grille cloth, although reproduction grille cloth is no longer available.

Let's see what the cabinet is supposed to look like. Take a look at this late version 1937 model 37-60B (same cabinet):

[Image: http://www.philcoradio.com/gallery/image...760bv2.jpg]

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Restoration of the Canadian General Electric A-87
Well... The console body has been restored, while the varnish dries reliably I started to paint the chassis ...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM
Part numbers to model cross
Jim, We have this index put together by Dale Cook but I don't think that is quite what you are looking for. The Parts...klondike98 — 09:37 PM
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM
Philco 42-345 Restoration/Repair
What does the resistor measure? I think it should be 3.3 Meg. If the oscillator coil has continuity and the resistanc...RodB — 09:03 PM
Philco Model 38-7: what caps & resistors do fail typically?
Good idea to check the coils... then I'll get hold of an incadescent light bulb and see what happens when the unit is sw...Musaeum — 08:49 PM
Philco 42-345 Restoration/Repair
I have that same set, ain't too much shortwave I like anyway.....it is a good AM DX set. PaulPaul Philco322 — 08:32 PM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum, Martin! Open a new thread in Philco Electronic Restoration when you begin working on your 38-7. ...GarySP — 08:28 PM

[-]
Who's Online
There are currently 821 online users. [Complete List]
» 2 Member(s) | 819 Guest(s)
AvatarAvatar

>