Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Is this a model 71H?
#1

Is this a model 71H, or possibly a Canadian 371H? I found this website through craigslist but have no idea what they want for the radios, other then a 1920s 3 dialer, all it says is offers. They do have a greatly overpriced Motorolla TV from the late 40s, the kind with the plastic front and 7 inch electrostatic CRT, for $400. They also have what looks like a model 76 or 96 lowboy but I have no way of knowing for sure.

http://www.cooljunk4you.com/#!Radio-coll.../image1h9o

Regards
Arrn
#2

Arran

That could be a later 71H with shadow meter, or it could be a 91H.

71H: http://www.philcoradio.com/gallery/1932b.htm#x

91H: http://www.philcoradio.com/gallery/1932b.htm#ad

Here's a photo of the set in question, from the Cool Junk website:

[Image: http://i326.photobucket.com/albums/k420/...arran1.jpg]

And a photo of the 1930 Philco lowboy from the same site:

[Image: http://i326.photobucket.com/albums/k420/...arran2.jpg]

No comment on what appears to be a hanging skeleton. Icon_eek

--
Ron Ramirez
Ferdinand IN
#3

The hanging skeleton is part of these guy's collection of medical junk, probably one of the few things that anyone would want along those lines. He also has a number of quack medical machines at very unrealistic prices. I think he was watching that show "Oddities" on the Discovery channel and thought he would take a crack at it, except that he is in a Podunk area called Errington that isn't even really a town, not a big city like New York. In fact it's not even really on the way to anywhere else, you have to go out of your way to get to it. Even in the case of the shop featured on that show they know they have a limited market and that only the really rare and unusual stuff is what people want, not stuff like incubators from the '70s.
Regards
Arran
#4

It would be nice if it was a 91H, but the photos in the gallery made me think that it may be a later model 71H given the marquetry above the control panel. This is assuming that it isn't a Canadian built Philco then all bets are off, it could be any chassis with that control arrangement, make me want to take a look at it and the other junk he has for sale.
Regards
Arran
#5

Go for it, Arran! Let us know what you find out.

I believe there is a later variation of that cabinet that has the inlay just like the one this seller has, changed from the pressed wood trim used on the early version.

--
Ron Ramirez
Ferdinand IN




Users browsing this thread:
[-]
Recent Posts
Restoration of the Canadian General Electric A-87
I also checked all the radio tubes on my Hickok 530 tube tester. The 5Z3 kenotron turned out to be faulty, all the other...RadioSvit — 08:02 AM
Restoration of the Canadian General Electric A-87
Well... While the varnish is drying up, I started repairing the chassis... Of course I started by replacing the pa...RadioSvit — 07:12 AM
Philco Model 38-7: what caps & resistors do fail typically?
Hello Martin, Welcome aboard our little community what great Model 38-7 Sincerely Richardradiorich — 12:30 AM
Philco Model 38-7: what caps & resistors do fail typically?
Welcome to the Phorum Martin. I count about 9 paper caps, the 3 electrolytic caps and 2-Y2 safety caps to replace th...RodB — 09:44 PM
Part numbers to model cross
Jim, We have this index put together by Dale Cook but I don't think that is quite what you are looking for. The Parts...klondike98 — 09:37 PM
Philco Model 38-7: what caps & resistors do fail typically?
Yep the dim bulb test is OK but I'd definitely replace all those electrolytics before I did it. Since those #47 conden...klondike98 — 09:18 PM
Philco 42-345 Restoration/Repair
The resistor is a 2.2 Meg, it was the last one I hadn't replaced. The broadcast is coming in after replacing it.osanders0311 — 09:09 PM
Philco 42-345 Restoration/Repair
What does the resistor measure? I think it should be 3.3 Meg. If the oscillator coil has continuity and the resistanc...RodB — 09:03 PM
Philco Model 38-7: what caps & resistors do fail typically?
Good idea to check the coils... then I'll get hold of an incadescent light bulb and see what happens when the unit is sw...Musaeum — 08:49 PM
Philco 42-345 Restoration/Repair
I have that same set, ain't too much shortwave I like anyway.....it is a good AM DX set. PaulPaul Philco322 — 08:32 PM

[-]
Who's Online
There are currently 1313 online users. [Complete List]
» 2 Member(s) | 1311 Guest(s)
AvatarAvatar

>