Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Philco Hi-Fi with radio.
#1

I have been trying to find an affordable floor type hi-fi and had this unit offered to me. Offered $30 and it was mine today. It's a slightly battered Philco Hi-Fi with the V-M changer and AM-FM radio in it. In spite of its looks and the phonograph needing some work, the radio works perfectly. Cord was bad, so am using a borrowed cord to test the unit, but it shows no hum and the stations seem dead on. Not sure what model it is. Here's the two pictures the guy emailed me last night:

   
   

With a bit of work, I hope to use this unit in my arcade building for music. Was trying for one of those RCA units I found, but the guy wanted way too much and this IS a Philco after all. Icon_smile

No matter where you go, there you are.
#2

It's a 1959 model G1707:
http://www.philcoradio.com/gallery/1959.htm#ab

Congratulations on your acquisition! Icon_thumbup

--
Ron Ramirez
Ferdinand IN
#3

Thanks Ron! That will help with the restoration of the unit. I will be having it gone over quite soon. Icon_smile

No matter where you go, there you are.
#4

Absolutely Snazzy!
#5

Thanks! I noticed this unit has two RCA plugs on the back, one for plugging other items into the unit and one for an external amplifier.

No matter where you go, there you are.




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM

[-]
Who's Online
There are currently no members online.

>