Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

41-608 bol
#1

hey guys
i purchased 2 sales listed as philco speakers 1 was a steal other inflated by seller but still cheep.
question is i belive they are mic`s as i have seen them before . 1 has a wire that goes to black box at top in rear of cabnet i opened it up looks like speaker to me ??


Attached Files Image(s)
   
#2

I bet it is intended as a mic but is just a small speaker. The low Z is boosted by the box which is an input transformer.
#3

Almost all passive electrical machinery is reciprocal.
#4

Yes. I seem to recall (in the dark, distant past), during "experiments", I was able to use a speaker as kind of a microphone. Icon_crazy Odd, but semi-effective. Icon_wtf Could be a hybrid?
#5

Dunno about that, but a small PM speaker makes a very good microphone, just use an output transformer in reverse. Done all the times in old time intercoms. In fact they sometimes used 45 ohm PM speakers to minimize losses in wiring from remotes to masters. Dunno about modern ones though.
#6

thanks guys
i only seen one with the radio for sale but was way to expencive for me
i see them on ebay but no cords as this one has cord i see where it goes .it dosen`t say any about it on my schamtic`s
now all i need is plater to motor cupler and it is complete
amazing a speaker can be a mic too!!
sam




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently 445 online users. [Complete List]
» 1 Member(s) | 444 Guest(s)
Avatar

>