Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Instant Philco Service "library"
#1

Recently I came across Philco RMS Yearbooks, containing all of the schematics for Philco home and auto radios for the years 1939, 1940, 1941, and 1942. If that weren't enough, I then found the yearbook for the 1946-47 models, as well as a genuine Philco 3-ring binder containing the schematics for all of the 1948-49 models. I was one happy camper to obtain this useful service material!

Greg V.
West Bend, WI
Member WARCI.org
#2

Well you lucky dog you.....where do people "come across" such things and why don't I come across those?
That is, of course there is the eBay and such but.....
#3

The RMS manuals are an outstanding resource for the respective model years. I also have the 39-42 manuals and have referred to them often!
#4

I actually found these at a garage sale of all places! VERY cheaply, I might add.

Greg V.
West Bend, WI
Member WARCI.org
#5

It looks like there's another similar Philco service binder like the one I recently found now available on eBay for those interested:

http://www.ebay.com/itm/1940s-PHILCO-SER...43c2fb1935

Greg V.
West Bend, WI
Member WARCI.org




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM

[-]
Who's Online
There are currently 1862 online users. [Complete List]
» 1 Member(s) | 1861 Guest(s)
Avatar

>