Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Tone control rebuild
#1

According to the parts list the tone control for my 16B should be a 30-4033 but what's under the chassis is a 30-4069, probably not much difference. Does anyone know what caps are inside and where they connect to? There are two small black wires that come out of the block and connect to the control and one red and one black that connect elsewhere under the chassis. Thanks, Brett
#2

Brett, perhaps this link might help.
http://www.philcorepairbench.com/tonectl.htm

Jerry

A friend in need is a pest!  Bill Slee ca 1970.
#3

Thanks Jerry, neither of my numbers were on that list plus I could use a little more info.
Brett
#4

I do not have 16B sch, I only have 16 - doesn't the sch show the caps in the tone control separately? At least in several Philcos I've dealt with it does, like in 90's tone control I've just rebuilt.
#5

    Brett,

I hope that you find this helpful




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
So one last question before I finish this radio. Regarding the speaker and output transformer. I salvaged the original o...Stormlord5500 — 09:31 AM
462ron
It’s on the bottom of the homepage of our Philcoradio.com homepage! Ron462ron — 07:20 AM
Model 70 Cabinet Trim
Steve might have some trim left. Not sure he is making anything.morzh — 06:12 AM
Model 70 Cabinet Trim
Hello musar, First all welcome to the forum and yes that is true that steve stopped making trim . Sincerely Richar...radiorich — 12:13 AM
Model 70 Cabinet Trim
I have recently come into possession of a Model 70.  The trim around the base needs to be replaced.  If this were years ...musar — 12:07 AM
philcorepairbench.com - shadow-meter
Anyone know of a way to recover these files from the repair bench? Thanks. fenbach — 11:16 PM
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM

[-]
Who's Online
There are currently 368 online users. [Complete List]
» 2 Member(s) | 366 Guest(s)
AvatarAvatar

>