Posts: 111
Threads: 27
Joined: Oct 2007
City: Livonia, MI
Received a table model 38-7 yesterday as the console model I have is going to need a little brother. Didn't pull the chassis out yet but in taking a quick once over on it, there is a difference on the number of tube shields between it and the chassis from the 38-7 console. Sorry if this is a silly question, but is there a way on the schematics to tell which tubes were designed to have shields, and is there a good source for them should I need some? Thanks in advance
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I've seen a few Philco schematics that indicated shields on tubes (by a dotted line surrounding the tube on the schematic), but most do not. The 38-7 schematic does not show shields on it. The only way to tell is to look on the chassis - assuming that the original shield bottoms surrounding the tube sockets have not been removed, that is.
I see the shields on eBay frequently;
Play Things Of Past is another possible source.
--
Ron Ramirez
Ferdinand IN
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
