Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Correct grille cloth for 1935 89B table model
#1

Can someone point me to the correct name / pattern grille cloth on the Richmond Designs website (http://www.richmonddesignsinc.com/ ) for this 89B? Many thanks.

Greg V.
West Bend, WI
Member WARCI.org
#2

I think whisky rayon is the closest there is.
#3

For a 1935 89B? Like this?

http://www.philcoradio.com/gallery/1935a.htm#af

That would have used this:

[Image: http://web.archive.org/web/2005110317463...g/num5.jpg]

Pattern #5, once available from (the now defunct) Radio Grille Cloth Headquarters. No one reproduces it anymore.

By the way, the Internet Archive's Wayback Machine makes it possible to see what we once had available to us, as a reference:

http://web.archive.org/web/2006010202254...cloth.com/

--
Ron Ramirez
Ferdinand IN
#4

Yes, that's the one, Ron. Many thanks for the info.

Greg V.
West Bend, WI
Member WARCI.org




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
PT 6 chassis screws size???
Have this done except for missing chassis screws. It looks like 1 inch 6/32 sheet metal screw may work but can anyone s...bridkarl — 10:32 PM
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM

[-]
Who's Online
There are currently 986 online users. [Complete List]
» 1 Member(s) | 985 Guest(s)
Avatar

>