Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Will this transformer work in my 38-7?
#1

32-7833N is the Philco part number. Someone on the ARF has one that I'll buy from him if it will work.

TIA
#2

Hi Brenda, you've probably seen this, but here are the specs for that transformer:

http://www.antiqueradios.com/forums/view...hp?t=32876

It looks very close, I can't find the exact B voltage of the 38-7.
#3

Here's another interesting page: http://www.oldradioparts.com/2a23efl.txt

4593-004 POWER PHILCO 32-7833 320-0-320V @85ma, 5V 2A, 6.3V 2.5A, MODEL 38-7/8/9


Looks close enough to me.
#4

I'm not really seeing what you are referring to there.
#5

I apologize, somehow I misread the first link.

At any rate, the second link I posted shows part number 32-7833 as correct for the 38-7.
#6

Yes, thank you. Icon_smile
#7

Just in case my other offer falls through, will this one work?

32 8137n




Users browsing this thread:
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
Hello Stormlord, Well done on rewinding that coil it turned fairly good for your first one. Sincerely Richardradiorich — 09:12 PM
Philco model 38 code 121 not receiving signal.
Well here it is. It ain't pretty, but hopefully it'll work. I checked it with my DMM on continuity and it keeps and r...Stormlord5500 — 08:56 PM
Philco 42-345 Restoration/Repair
Yes, 57 is an electrolytic cap that should be 12 mfd 400 volts according to the parts list from the Phorum library schem...RodB — 06:01 PM
Philco 42-345 Restoration/Repair
Looks like if I am reading it correctly it looks like the silver capacitor#57 that appears to be a replacement is of a l...osanders0311 — 05:09 PM
Philco model 38 code 121 not receiving signal.
Thanks Arran. Yeah this plastic is pretty thin. It's a little thinner than the original stuff. It kinda reminds me of p...Stormlord5500 — 04:37 PM
Testing a speaker and output transformer Trutone A2-G
The equivalent of one short turn is basically the same as that of a shorted load. If it is the primary's turn, then the ...morzh — 03:53 PM
Testing a speaker and output transformer Trutone A2-G
I've never had an output transformer become shorted, the failure mode is usually an open primary, or in a center tapped ...Arran — 03:52 PM
Philco model 38 code 121 not receiving signal.
As long as the plastic sheeting isn't too thick, I think that the thickness of photographic film would be just about rig...Arran — 03:19 PM
Philco model 38 code 121 not receiving signal.
Well why not! :lol:Stormlord5500 — 03:14 PM
Philco model 38 code 121 not receiving signal.
Good luck next thing you know you will be winding coils just for the fun of it. DavidDavid — 11:29 AM

[-]
Who's Online
There are currently 866 online users. [Complete List]
» 2 Member(s) | 864 Guest(s)
AvatarAvatar

>