Welcome Guest! Be sure you know and follow the Phorum Rules before posting. Thank you and Enjoy! (January 12) x

Thread Closed
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Question about model 116
#1

There is a Model 116 on Ebay. Here is the link:

http://cgi.ebay.com/160211172771

I am considering placing a bid on it and notice it has what looks like 2 switches and some sort of control knob on the side. The rear view shows another switch mounted on a metal bracket and some sort of chassis mounted on the side of the radio.

Does anyone know what the chassis mounted on the side is and are all these original? I don't want to bid on it if these were added by someone later on.

Thanks

John K.
#2

Appears heavily modified for who knows/knew what.....knobs, switches, an extra chassis bolted to the cabinet interior with holes thru the wood side. Yikes!
#3

OK Chuck, thanks for the reply. Sounds like I should pass on this one.

John K.
#4

Chuck Schwark Wrote:Appears heavily modified for who knows/knew what.....knobs, switches, an extra chassis bolted to the cabinet interior with holes thru the wood side. Yikes!

I saw this one as well, not to buy, but I shook my head in disbelief with that awful modification that took place. Good move for you not to buy. What I cannot believe is the going price now. I smell a hoax.

73 de,

Gary/N9VU
#5

No shilling going on. I know the high bidder. But I fear he does not realize how heavily modified this 116B is. I will contact him and let him know...

--
Ron Ramirez
Ferdinand IN




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Philco model 38 code 121 not receiving signal.
That's true. Of course If I were to get a vtvm I'd probably have to sink money in to it to get it working right. Probabl...Stormlord5500 — 08:44 PM
Philco model 38 code 121 not receiving signal.
A DMM is good enough. One rarely has to measure indictance, but if you do, short of getting a serious LCR meter (I hav...morzh — 07:35 PM
Testing a speaker and output transformer Trutone A2-G
You guy's are right on. I found a broken wire on the speaker plug that I replaced and all is well now. Have better volu...murf — 03:43 PM
Philco model 38 code 121 not receiving signal.
I need to get a vtvm. I think that little component tester is just more accurate. Plus it shows the inductance which is ...Stormlord5500 — 03:07 PM
Philco model 38 code 121 not receiving signal.
I use a pair of Mastercraft brand DMMs from Canadian Tire, from what I read most of those DMMs use the same main chip re...Arran — 02:36 PM
Philco model 38 code 121 not receiving signal.
Thank you sir. Yes I feel good and also relieved because this one's been weighing on me a bit.Stormlord5500 — 11:18 AM
Philco model 38 code 121 not receiving signal.
It feels good don't it? Good luck on the rest.Paul Philco322 — 11:06 AM
Philco model 38 code 121 not receiving signal.
I've reinstalled the coil. Now IT'S ALIVE!!!!!! I fired up my TinySA on signal generator mode and set it to 1400Kc and ...Stormlord5500 — 11:01 AM
Philco model 38 code 121 not receiving signal.
Yes, Walmart, right up there with Fluke.RodB — 11:00 AM
PT 6 chassis screws size???
it certainly won't be metric! SAE threads were all that was known then. Take care, - GaryGarySP — 10:58 AM

[-]
Who's Online
There are currently 1848 online users. [Complete List]
» 1 Member(s) | 1847 Guest(s)
Avatar

>