One more Rogers console - Printable Version

One more Rogers console - Printable Version

+- The PHILCO Phorum (https://philcoradio.com/phorum)
+-- Forum: Various and Sundry Categories (https://philcoradio.com/phorum/forumdisplay.php?fid=37)
+--- Forum: Other Radios (Non-Philco) (https://philcoradio.com/phorum/forumdisplay.php?fid=12)
+--- Thread: One more Rogers console (/showthread.php?tid=12005)

Pages: 1 2

One more Rogers console - Dan Walker - 04-04-2015

I actually bought this last month , but I just received it.
it is a 1936 Rogers model 6R932. Someone had started to strip it and the marks on top are where they set down the can containing stripper.. I do have all the knobs and the cover for the tuning light.
After I recap it and do the cabinet it will be a keeper because these Rogers cabinet's are very nice ,made with
real wood..

RE: One more Rogers console - morzh - 04-04-2015

a good looking SOB, for sure, and not too low in tube count, has potential.
Good find, congrats.

RE: One more Rogers console - Fred Taylor - 04-04-2015

(04-04-2015, 10:18 AM)Dan Walker Wrote: I actually bought this last month , but I just received it.
it is a 1936 Rogers model 6R932. Someone had started to strip it and the marks on top are where they set down the can containing stripper.. I do have all the knobs and the cover for the tuning light.
After I recap it and do the cabinet it will be a keeper because these Rogers cabinet's are very nice ,made with
real wood..

Nice looking radio , that's going to beautiful when your finished post pictures when done

RE: One more Rogers console - jerryhawthorne - 04-04-2015

Wow Dan, that has some lovely wood and a chassis that should be a great performer. We all wish to follow your restoration.
Best, Jerry

RE: One more Rogers console - KCMike - 04-04-2015

Very nice wood grain patterns on cabinet. Bet that dial will look sharp lit up in the dark. Good luck.

RE: One more Rogers console - PhilcoJohn - 04-04-2015

Mike your right great wood grain on the cabinet. I have not seen or heard one of these radios in person though. Hope it turns out great!

RE: One more Rogers console - Dan Walker - 04-04-2015

The dial is the same as the Rogers 10-12, but the tube count is only nine compared the 10-12 which has twelve.
It will be a while before I get to the cabinet, as we are getting about 4 inches of snow today.
I will post photos as I go along. someone has been in the chassis and did a bad job of soldering and the work is quit sloppy.. I have checked it over and fired it up and it picks up stations all across the dial, so everything is there and working. After the caps and the bias cell it should perform quite well.. All of my Rogers set have a very nice sound. The more I work on these Rogers sets the easier it gets

RE: One more Rogers console - jerryhawthorne - 04-05-2015

Dan, 4" of snow? We are about ready to turn on the A/C! Where the heck do you live?
Jerry

RE: One more Rogers console - Dan Walker - 04-05-2015

I live in Calgary, Alberta, Canada

RE: One more Rogers console - PhilcoMike - 04-06-2015

Love their dialscales, definitely a different approach that appeared decades later during the stereo receiver wars of the 70's....

Mike

RE: One more Rogers console - jerryhawthorne - 04-06-2015

Dan, a lovely city and visited many times for work in the summer mostly. You might add that to your location in your profile.
Best, Jerry

RE: One more Rogers console - Dan Walker - 04-15-2015

    I have this Rogers all recapped . All that is left to do is the cabinet.
      Here are some photos of one of the cardboard boxes that contained three caps. The radio did work with this in it.
        The dial scale is in very good condition and now the radio plays very good.

RE: One more Rogers console - Dan Walker - 05-04-2015

   Well here it is so far, all stripped with a coat of sealer and Mohawk dark walnut on the bottom and the top sides.
This one should come out nice.
    Every console I restore is my favorite , until the next one comes along, but this one really has some nice quality wood and I can't wait until it is finished
   I will post more photos when it is done.

RE: One more Rogers console - jerryhawthorne - 05-05-2015

Looking really great. Thanks for posting the pictures.
Jerry

RE: One more Rogers console - sam - 05-05-2015

WOW Icon_eek

now that is one hellva nice radio Icon_thumbup

sam