Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Almost done with 650 H
#1

I'm new to the phorum. Just wanted to say thanks for all the help and answers I was able to
Get from reading all the experiences you all have shared and discussed. Thanks Ron for your
Detailed description on the tuning drive assembly. I really had a time with that D ring wire. This 
Is my first restoration really had fun.
Thanks again Paul
#2

Welcome aboard, Paul! But don't thank me on the dial drive info, thank Richard Hines who supplied the text and photos. I just posted it all on his behalf. Icon_smile

For those curious, the thread in question may be found here.

--
Ron Ramirez
Ferdinand IN
#3

Welcome to the Phorum!
Icon_wave
#4

A photo of my 650 H     
#5

Welcome Paul!

People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
#6

Hi Paul and Welcome,
I've got it's big brother.
[Image: http://philcoradio.com/phorum/attachment.php?aid=11710]
Your 650H is nice looking!!!!

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#7

(03-21-2017, 09:56 PM)Radioroslyn Wrote:  Hi Paul and Welcome,
I've got it's big brother.
[Image: http://philcoradio.com/phorum/attachment.php?aid=11710]
Your 650H is nice looking!!!!
  
  Thanks Terry, that's a very nice 660 L (right?) its only the 2nd one I've ever seen.
And thanks for the welcome, Paul
#8

Yup 660L. I've only seen one other too, on the net and I think it's over on the left coast.

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry
#9

Nice 650H! I'd really like to find one of those someday! I really like the lyre design! I have a set of lyre back chairs this Radio would look good with in the same room someday!
If they're rare, though, if I was ambitious enough, I might try to make my own cabinet. Icon_crazy
I do have a 650X unrestored that looks pretty decent. It's an 8-tube if I recall, so it should be pretty decent sounding and a good performer!

Blessings,
Jeff W.
Jonesboro, Arkansas

http://jeffsradios.weebly.com

God loves you as you are, not as you should be, because none of us are as we should be. - Brennan Manning
#10

Here's me 650 MX, that I've had for about 30 years.  Found it in the local paper back then for $50 and restored it, as the finish was too far gone to save.  That is the original speaker cloth! Lucky for me, as reproductions back then, weren't readily available. Seems to be a fairly uncommon model. Love that trap door dial on the 650 series!
[Image: http://www.surfacezero.com/g503/data/500...0_MX_a.JPG]
[Image: http://www.surfacezero.com/g503/data/500...650_MX.JPG]
#11

Very Nice!!!
I was hoping to get busy on refinishing my 660L but the weather this spring/summer/fall was not very conducive to spraying lacquer. Spring is coming!!

When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!

Terry




Users browsing this thread:
[-]
Recent Posts
Jackson 715 not working
Mrfixr55, its working now. I cleaned the switches and sockets with spray cleaner. Thanks for helping on this one.daveone23 — 06:26 PM
Jackson 715 not working
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM
Philco 91 Speaker Replacement
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM
Philco 91 Speaker Replacement
As Rod said, it is OK to use a fitting speaker, and then look for an original one. If you buy a Hammond 125 output tr...morzh — 08:15 AM

[-]
Who's Online
There are currently no members online.

>