I finally found a good one!
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
Everytime I find one of these it has cracked veneer on the top curved portion, this one is ok. I've wanted one for several years. This was on CL for 3 hours when I saw it stting in my in-laws in Queens tonight. Kirk, it wasn't far from you in Belmore. I flew over and paid $60 for it. Now to get it home. One thing I noticed on this and all the others I saw was the top gets loose and if you try to pick it up it will come off and crack the curved portion of the veneer. I'll bring some glue and clamps next time I visit to bring it home.
It is missing a clarifier and the dial and glass. I have two parts chassis and a broken cabinet with those parts in tact.
Steve
[Image: http://i1033.photobucket.com/albums/a414...75ed19.jpg]
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
steve
nice find and steal
I`ll be over to pick up don`t tell mike 
sam
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
(01-17-2015, 09:51 PM)sam Wrote: steve
nice find and steal
I`ll be over to pick up don`t tell mike
sam
I have to hide it now!
Posts: 15,691
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
I have one, I do not need another one.....but nice buy nevertheless.
Posts: 1,463
Threads: 97
Joined: Jul 2012
City: Poughkeepsie, N.Y.
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
Thanks John. It seems there are still a lot of them out there, just never close to me until now.
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
 I know where their is a nice old corvette
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
(01-20-2015, 07:34 PM)sam Wrote: I know where their is a nice old corvette
Now I have to hide that too!
Posts: 2,572
Threads: 337
Joined: Jun 2013
City: lawrenceville nj
Come on share your toys 
Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
If you help me put it back together maybe. It is in a least 100 pieces right now.
Posts: 344
Threads: 38
Joined: Jun 2011
City: Tustin
State, Province, Country: California
Nice radio! $60 is a steal 
Posts: 496
Threads: 15
Joined: Mar 2013
City: Weymouth Ma
(01-17-2015, 09:19 PM)SteveJB Wrote: Everytime I find one of these it has cracked veneer on the top curved portion, this one is ok. I've wanted one for several years. This was on CL for 3 hours when I saw it stting in my in-laws in Queens tonight. Kirk, it wasn't far from you in Belmore. I flew over and paid $60 for it. Now to get it home. One thing I noticed on this and all the others I saw was the top gets loose and if you try to pick it up it will come off and crack the curved portion of the veneer.
That's how I got mine. The previous owner picked it up by the top and just about pulled it off. The front is cracked and you could probably lift it off with out too much effort. It was good to get at the time but I don't see getting to it soon. Good luck with yours.
Henry
Posts: 236
Threads: 43
Joined: Oct 2010
City: Atlantic Highlands, NJ
Thanks Henry, the curved veneer is very hard to repair. I will use my other one as a parts set to fix this one.
Users browsing this thread: 1 Guest(s)
|
|
Recent Posts
|
|
Jackson 715 not working
|
| Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM |
|
HiFi (Chifi) tube amp build - but my own design.
|
| What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM |
|
Jackson 715 not working
|
| Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM |
|
Restoring Philco 37-604C
|
| Yep. F5 is green, D5 is Red.
Red is Bad.
Green is Clean.morzh — 01:30 PM |
|
Jackson 715 not working
|
| I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM |
|
Restoring Philco 37-604C
|
| (Insert Homer Simpson "DOPF" Here.)
When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM |
|
Philco 91 Speaker Replacement
|
| From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil.
It wo...morzh — 08:44 AM |
|
Philco 91 Speaker Replacement
|
| My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM |
|
Philco 91 Speaker Replacement
|
| As Rod said, it is OK to use a fitting speaker, and then look for an original one.
If you buy a Hammond 125 output tr...morzh — 08:15 AM |
|
Philco 91 Speaker Replacement
|
| Yes, I often have to substitute, then keep an eye out for an original. In the meantime, the radio is working and being e...RodB — 08:02 AM |
|
Who's Online
|
| There are currently no members online. |
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
