Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Coin Op radio decals
#1

So I am going through these radios and have 4 different decals

One is a sticker decal so I figured I would try replicating it myself.

If there is anything I should change please let me know...!

Here is the before:
   

Here is the after:
   


Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#2

wow very nice kirk Icon_clap Icon_clap
sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#3

(01-10-2015, 07:07 PM)sam Wrote:  wow very nice kirk Icon_clap Icon_clap
sam

nAME CHANGE?

Here is the one I am working on now.


Attached Files Image(s)
       

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#4

kirk
yes using my real name
what program do you use to retrace them with
sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#5

The first one looks pretty good.  Only when compared directly with the original do I see a couple of minor differences; the black vs. green lettering and the spacing in between the M and E in COMEDY. It looks very good, and I'm sure the second one will also with a little more work Icon_thumbup

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#6

Kirk;
  There is some outfit that will reproduce water slide decals for you, Bob Andersen and Phil Nelson used them to reproduce sets of decals for the controls of early Admiral televisions. Apparently once they are set up they can run off new batches as needed at lower cost. You can go that route or have a go at using some water slide transfer paper like Lasertran. As you can see from teh cracking and flaking the decal in the first photo is some sort of paint based material rather then being on paper, sort of like the faux wood grain they used on radio cabinets and car dashboards, although paper may work. What is interesting is that it looks like something is underneath that first decal, perhaps another Tradio logo? It also looks like someone may have repainted the cabinet as there is grey paint under that beige paint. Whatever you do don't try to print these up on plastic stickers, even though print shops push them they look fake and will peel off over time from the glue letting go. 
Regards
Arran
#7

I see now the "COM EDY" issue but I thought the decal was faded black!

Ugh, I knew I should have done green......

As for the decal paper, I should have thought of that. It is a plastic.... Icon_rolleyes

I guess I will have to get some and try it. As for the color of the cabinet, the grey is the metal underneath I think. Under the actual paper/plastic decal is an older globe decal.

Thanks guys

Kirk

EDIT:

Here it is:


Attached Files Image(s)
   

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#8

oK NUMBER 2 IS DONE if anyone has any suggestions!


Attached Files Image(s)
       

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#9

kirk  Icon_clap Icon_clap Icon_clap Icon_thumbup
if you want to be picky
the for is to skinny
the word   world   has white lines in it
and  deal nj   not proper position
I like the first one better with green  then black
sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#10

i see them now,
Thanks Sammy!

Kirk

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#11

You're doing great Kirk!  But being picky..... in the word TRADIO the letters R  D  &  O have some white lines going through them.  Also there is a small thing missing to the left of 1946

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
#12

How about this boys and girl...


Attached Files Image(s)
       

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#13

kirk
that looks great  like the Asbury park nj Icon_thumbup
but is the back ground light blue ?
sam

Some day, and that day may never come, I will call upon you to do a service for me. But until that day, accept this justice as a gift
mafiamen2
#14

(01-17-2015, 08:06 PM)sam Wrote:  kirk
that looks great  like the Asbury park nj Icon_thumbup
but is the back ground light blue ?
sam

yes it is light blue.

This is Eduardo's first decal he made me. The rest are being done this week.

Much better than mine  Icon_lol

Times I have been electrocuted in 2021
As of 1/01/2021
AC: 4 DC: 1
Last year: 6
#15

Eduardo does some beautiful work Icon_thumbup

John KK4ZLF
Lexington, KY
"illegitimis non carborundum"




Users browsing this thread: 1 Guest(s)
[-]
Recent Posts
Jackson 715 not working
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM
Philco 91 Speaker Replacement
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM
Philco 91 Speaker Replacement
As Rod said, it is OK to use a fitting speaker, and then look for an original one. If you buy a Hammond 125 output tr...morzh — 08:15 AM
Philco 91 Speaker Replacement
Yes, I often have to substitute, then keep an eye out for an original. In the meantime, the radio is working and being e...RodB — 08:02 AM

[-]
Who's Online
There are currently 4944 online users. [Complete List]
» 2 Member(s) | 4942 Guest(s)
AvatarAvatar

>