05-18-2016, 07:59 AM
Here is a link to the schematic for anyone else following this thread:
http://www.nostalgiaair.org/pagesbymodel...013208.pdf
I'll let one of the resident experts chime in, but until then you might want to check some tube voltages. You can also check the output transformer ( #38 ) for 400 ohms.
I doubt that one resistor is the problem, but if one of them is out-of-spec that much then there are probably more that need to be changed.
http://www.nostalgiaair.org/pagesbymodel...013208.pdf
I'll let one of the resident experts chime in, but until then you might want to check some tube voltages. You can also check the output transformer ( #38 ) for 400 ohms.
I doubt that one resistor is the problem, but if one of them is out-of-spec that much then there are probably more that need to be changed.
John KK4ZLF
Lexington, KY
"illegitimis non carborundum"
