04-27-2010, 08:55 PM
If iam reading this right . your talking about tuning condenser ? You can use wd-40 spray it good use your hand to break it free .
If you try to do it with dial could break dial string . Have to take chassi out of set to do this . If wd-40 doesn,t do it pb blaster will get at auto parts store .
If the whole thing is rusty or has oxidation on it take some fine sand paper to it. In between fins ect takes time . Then blow it off with air .
If you try to do it with dial could break dial string . Have to take chassi out of set to do this . If wd-40 doesn,t do it pb blaster will get at auto parts store .
If the whole thing is rusty or has oxidation on it take some fine sand paper to it. In between fins ect takes time . Then blow it off with air .
