09-23-2018, 09:26 AM
Hopefully these pictures will help.
You remove the nuts and lockwashers on top, then you have to pry the bottoms of the cans away from the tabs locking the cans in place at the bottom. There are two tabs per coil, on opposing sides (you only see one tab in the photo above).
Of course the 37-116 only has two IF transformers as part of its IF expander assembly instead of three in the 37/38-690, but the assembly should otherwise be the same.
You remove the nuts and lockwashers on top, then you have to pry the bottoms of the cans away from the tabs locking the cans in place at the bottom. There are two tabs per coil, on opposing sides (you only see one tab in the photo above).
Of course the 37-116 only has two IF transformers as part of its IF expander assembly instead of three in the 37/38-690, but the assembly should otherwise be the same.
--
Ron Ramirez
Ferdinand IN
