11-20-2018, 02:10 PM
A blob of solder is bridging a connection somewhere? Also carefully inspect nearby components that could have been pushed so that their leads are shorting against something.
I repaired a 47-1227 way back when (2002) that had a 3 lead capacitor like C419. I recall having the same problem (dead across all bands) because I wired in the replacement cap wrong. It sounds like when you re-installed the old cap you may have wired it in incorrectly. How did you have the replacement wired?
I repaired a 47-1227 way back when (2002) that had a 3 lead capacitor like C419. I recall having the same problem (dead across all bands) because I wired in the replacement cap wrong. It sounds like when you re-installed the old cap you may have wired it in incorrectly. How did you have the replacement wired?
