04-06-2019, 07:44 PM
After several days away from the workbench, I went back to it today and made a lot of progress on the TP-5-I.
Much of the new wiring is in place, along with many of the components including both IF transformers.
The highlights on the schematic below give you a better idea of what I have accomplished so far, and what remains to be done.
Oh, and before doing any wiring or installing any components today, I ground down the lip where the power cord enters and installed a rubber grommet in place of the lip so the power cord won't be damaged by the hole in the chassis for the cord.
Much of the new wiring is in place, along with many of the components including both IF transformers.
The highlights on the schematic below give you a better idea of what I have accomplished so far, and what remains to be done.
Oh, and before doing any wiring or installing any components today, I ground down the lip where the power cord enters and installed a rubber grommet in place of the lip so the power cord won't be damaged by the hole in the chassis for the cord.
--
Ron Ramirez
Ferdinand IN
