07-04-2023, 08:54 AM
Thanks MrFix for the time to explain the hookup for the phono plug. Clear and concise. Much appreciated. I’m at a cottage for a couple of days and will check out the 42’s when I get home. I do know however that pin 2 and 3 are jumpered together for all 3 of them. Thanks again!
462ron. There was a lot of damage to the veneer in spots and the fact that I had to make a new tilt-top piece since it was impossible to straighten the original piece, I went with Teak oil only. I put around 5 thin coats on and thats what ended up giving it the sheen. Some of the trim that originally would have used a toner was badly gouged in spots and was a bit easier to hide the gouges by painting it black. I know that not for purists but getting Mohawk toners here in Canada is difficult and expensive. I realize that doesn’t help you out but thats the procedure I used with this radio. Cheers
462ron. There was a lot of damage to the veneer in spots and the fact that I had to make a new tilt-top piece since it was impossible to straighten the original piece, I went with Teak oil only. I put around 5 thin coats on and thats what ended up giving it the sheen. Some of the trim that originally would have used a toner was badly gouged in spots and was a bit easier to hide the gouges by painting it black. I know that not for purists but getting Mohawk toners here in Canada is difficult and expensive. I realize that doesn’t help you out but thats the procedure I used with this radio. Cheers
