07-23-2011, 01:19 PM
Cool, thanks.
One last question before I power this on (with the assumption that this works):
I have 3 pins on the power switch. If I were looking at it with the pins in my direction and the knob pointed downward, which pins should give me continuity? Pin 1 and 2 give me continuity but only with the volume down low (just right after the "click"). I can't get continuity on pin 3 with any of the other pins with the knob in the "on" position.
EDIT: Forgot to say that the continuity was received with everything hooked up to the pins.
One last question before I power this on (with the assumption that this works):
I have 3 pins on the power switch. If I were looking at it with the pins in my direction and the knob pointed downward, which pins should give me continuity? Pin 1 and 2 give me continuity but only with the volume down low (just right after the "click"). I can't get continuity on pin 3 with any of the other pins with the knob in the "on" position.
EDIT: Forgot to say that the continuity was received with everything hooked up to the pins.
