03-20-2014, 06:18 AM
Murph;
One company I have heard recommended is:
www.heyboertransformers.com
They are said to be relatively inexpensive and do custom transformer construction. If you know the physical dimensions and can provide the needs regarding voltage and current in the primary plus the type of output circuit (single ended or push-pull) and the output tube types they could build something that should be almost identical to the original. If you have the old part they may be able to build one using the old frame and leaves. That would be especially nice as it may include the original part number. Modern materials would be used so the part would likely be more resistant to failure in the future.
Joe
One company I have heard recommended is:
www.heyboertransformers.com
They are said to be relatively inexpensive and do custom transformer construction. If you know the physical dimensions and can provide the needs regarding voltage and current in the primary plus the type of output circuit (single ended or push-pull) and the output tube types they could build something that should be almost identical to the original. If you have the old part they may be able to build one using the old frame and leaves. That would be especially nice as it may include the original part number. Modern materials would be used so the part would likely be more resistant to failure in the future.
Joe
