03-21-2015, 09:58 PM
I would try a few things. Listen in on the osc with a xsistor radio( tune the 19 to 1MC and listen for the osc signal at 1MC+the IF frequency) Place the xsistor set near the mixer tube.
Double check the primary of the ANT coil. It can have the same fate as the osc had.
Check for bent rotor plates on the tuning condenser.
Terry N3GTE
Double check the primary of the ANT coil. It can have the same fate as the osc had.
Check for bent rotor plates on the tuning condenser.
Terry N3GTE
