06-30-2015, 06:18 PM
22 is better than 12 you know. they will work fine. Cold side of the off/on switch. Turn the set off. Use your ohm meter and measure the resistance from each of pin on the AC plug to the off/on switch one terminal at a time. The one which shows continuity to the off/on switch is NOT one to connect the - side of the two filters. Use the other switch terminal. This is B-.
To put simply what we are trying to find is which side of the off/on switch is connect to the power cord. One side of the cord is connected to the switch and the other side of the cord is connected to pins 2 and 5 of the 25Z5. The - side of the filters connect to the side of the switch that is NOT connect to the cord.
Terry
You know I'm lisdexsic
To put simply what we are trying to find is which side of the off/on switch is connect to the power cord. One side of the cord is connected to the switch and the other side of the cord is connected to pins 2 and 5 of the 25Z5. The - side of the filters connect to the side of the switch that is NOT connect to the cord.
Terry
You know I'm lisdexsic
