08-10-2015, 08:24 AM
Here's some encouragement.
http://home.comcast.net/~k7rld/RAS-5.html
Does it come with the rack? If not, you could make one pretty easily. The rack with my HRO-M is two pieces of steel angle stock with a series of tapped holes drilled every inch or so to make up the vertical portions. Another piece of angle stock goes across the bottom (and there probably was one along the top but mine has been cut down). Then there are two lengths of flat steel stock that protrude toward the back on the bottom to provide stability.
http://home.comcast.net/~k7rld/RAS-5.html
Does it come with the rack? If not, you could make one pretty easily. The rack with my HRO-M is two pieces of steel angle stock with a series of tapped holes drilled every inch or so to make up the vertical portions. Another piece of angle stock goes across the bottom (and there probably was one along the top but mine has been cut down). Then there are two lengths of flat steel stock that protrude toward the back on the bottom to provide stability.
Sean
WØKPX
