01-14-2016, 04:13 PM
I recently dug into my first Philco - a 37-10 with automatic / magnetic tuning - and set out to restore it.
[Image: https://farm4.staticflickr.com/3030/2989...64f5_z.jpg]
[Image: https://farm6.staticflickr.com/5679/2375...c9d9_z.jpg]
It worked fairly well well when I got it then sat in a closet for a few years. This was my first good luck under the chassis and I was surprised to see so little work had been done to it. Just a few new electrolytics and paper caps. I later found that the volume and tone controls had been replaced too.
[Image: https://farm6.staticflickr.com/5776/2402...e36f_z.jpg]
[Image: https://farm2.staticflickr.com/1442/2375...9c47_z.jpg]
[Image: https://farm2.staticflickr.com/1503/2405...1b61_z.jpg]
[Image: https://farm4.staticflickr.com/3030/2989...64f5_z.jpg]
[Image: https://farm6.staticflickr.com/5679/2375...c9d9_z.jpg]
It worked fairly well well when I got it then sat in a closet for a few years. This was my first good luck under the chassis and I was surprised to see so little work had been done to it. Just a few new electrolytics and paper caps. I later found that the volume and tone controls had been replaced too.
[Image: https://farm6.staticflickr.com/5776/2402...e36f_z.jpg]
[Image: https://farm2.staticflickr.com/1442/2375...9c47_z.jpg]
[Image: https://farm2.staticflickr.com/1503/2405...1b61_z.jpg]
