03-17-2016, 08:53 AM
Hello:
I'm in the process of recapping a model 650. I've found that bakelite block 80 part number 6287-DU has two caps in it. The parts list has part 80 as a .3 mfd cap in the bakelite block. The tar is melted out and oozed over the block a little. The cap leads are soldered; two leads on the screw end, one on the middle and one on the end. Thanks for your help. This isn't what I expected when looking at the schematics and parts list. Here's a couple of photos.
Thanks for you help,
Dave
I'm in the process of recapping a model 650. I've found that bakelite block 80 part number 6287-DU has two caps in it. The parts list has part 80 as a .3 mfd cap in the bakelite block. The tar is melted out and oozed over the block a little. The cap leads are soldered; two leads on the screw end, one on the middle and one on the end. Thanks for your help. This isn't what I expected when looking at the schematics and parts list. Here's a couple of photos.
Thanks for you help,
Dave
