04-02-2017, 06:05 PM
Starting a new challenge.
[Image: http://i1336.photobucket.com/albums/o654...wwpjrl.jpg] This is going to be a real challenge to straighten out.
Notice the added filter can in center upper left side. The tuning cap hits it before you get to 800kz.
Under side. Lot of scabbing took place.
[Image: http://i1336.photobucket.com/albums/o654...cchcsu.jpg] The filter can assembly has been bypassed in some sections. I count ten caps in the original can according to schematic. It also has two Philco pots in it.
[Image: http://i1336.photobucket.com/albums/o654...5rsqvh.jpg]
The capacitor can that has to be rebuilt along with lots of wire tracing.
[Image: http://i1336.photobucket.com/albums/o654...qbaf9u.jpg] Well it will be a fun challenge anyway and at least the coils all have continuity and power trans. is okay.
[Image: http://i1336.photobucket.com/albums/o654...wwpjrl.jpg] This is going to be a real challenge to straighten out.
Notice the added filter can in center upper left side. The tuning cap hits it before you get to 800kz.
Under side. Lot of scabbing took place.
[Image: http://i1336.photobucket.com/albums/o654...cchcsu.jpg] The filter can assembly has been bypassed in some sections. I count ten caps in the original can according to schematic. It also has two Philco pots in it.
[Image: http://i1336.photobucket.com/albums/o654...5rsqvh.jpg]
The capacitor can that has to be rebuilt along with lots of wire tracing.
[Image: http://i1336.photobucket.com/albums/o654...qbaf9u.jpg] Well it will be a fun challenge anyway and at least the coils all have continuity and power trans. is okay.
