04-27-2019, 06:38 PM
A simple way to measure the primary on the ant coil is to unplug the set from the wall socket. Turn the volume up all the way and measure the resistance from the ant to the gnd posts. If it measures more than 5 or 10 ohms it's open.
GL
GL
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
