07-04-2019, 11:32 PM
> I'm assuming the humbucking coil wouldn't be needed?
Yes because it works off of the magnetizum provided be the field coil and your not using one.
> It calls for 120 and 130ohms, I was getting 185 and 194.
As long as the each of the windings (from center to center) are fairly close in resistance I wouldn't loose any sleep over it. If it were 20 ohms or more it may suspect.
Yes because it works off of the magnetizum provided be the field coil and your not using one.
> It calls for 120 and 130ohms, I was getting 185 and 194.
As long as the each of the windings (from center to center) are fairly close in resistance I wouldn't loose any sleep over it. If it were 20 ohms or more it may suspect.
When my pals were reading comic books
I was down in the basement in my dad's
workshop. Perusing his Sam's Photofoacts
Vol 1-50 admiring the old set and trying to
figure out what all those squiggly meant.
Circa 1966
Now I think I've got!
Terry
