04-17-2020, 08:59 AM
I have a 49-505 and I can't seem catch a break with SMD the thunderstorm that never ends! Here is the link.
http://www.nostalgiaair.org/pagesbymodel...013664.pdf
The output IF #36 has 6 solder points ( As opposed to 4 if the Input IF) and shows to caps (100pf each) tapped in the center to the B-. What do these do?
Also on the Input IF I opened up the existing caps and put in 100pf caps on each side. I can find no value for these but from a previous post someone said that these values should work. Thoughts?
Thanks Eric
http://www.nostalgiaair.org/pagesbymodel...013664.pdf
The output IF #36 has 6 solder points ( As opposed to 4 if the Input IF) and shows to caps (100pf each) tapped in the center to the B-. What do these do?
Also on the Input IF I opened up the existing caps and put in 100pf caps on each side. I can find no value for these but from a previous post someone said that these values should work. Thoughts?
Thanks Eric
