03-27-2006, 08:12 AM
OK, looking at the schematic the #1 goes to the condenser block; I edited the post to reflect that.
Good call on the other schematic. I just looked over the circuit; the 4 and 5 wires are going to the larger pins on the 80, which are the heater pins, I believe.
The original and replacement power transformers have slightly different outside construction. Am I going to need to fire up these transformers on the bench (removed from the radio) to verify their output voltages?
Good call on the other schematic. I just looked over the circuit; the 4 and 5 wires are going to the larger pins on the 80, which are the heater pins, I believe.
The original and replacement power transformers have slightly different outside construction. Am I going to need to fire up these transformers on the bench (removed from the radio) to verify their output voltages?
