08-07-2023, 01:04 AM
Duh, I’m a dummy. I finally found a picture that makes this all clear. There was a dual cap - common ground. Connecting a ground to each end of the candleohm will never work - facepalm.
Common ground of 12 and 16 mfd to 15 ohm end of candleohm
Positives to appropriate terminal strip locations
8mfd cap negative to 146 ohm candleohm
Positive to pin8 of 5y3
Common ground of 12 and 16 mfd to 15 ohm end of candleohm
Positives to appropriate terminal strip locations
8mfd cap negative to 146 ohm candleohm
Positive to pin8 of 5y3
