07-13-2006, 03:39 PM
The Model 16X (console) came in this style with rosette knobs:
[Image: http://www.philcorepairbench.com/images/16Xearly.jpg]
and this later version with the black hex type knobs:
[Image: http://www.philcorepairbench.com/images/16Xlate.jpg]
The switch on the side is the QAVC on/off switch; see PHILCO SERVICE HINTS & TIPS - NUMBER 24
Model 16 and 17 Q-AVC Adjustment & Operation
The old antenna coupler screwed inside the console is from a Philco antenna system that used an outdoor dipole antenna with a balanced, twisted-pair lead in.
[Image: http://www.philcorepairbench.com/images/16Xearly.jpg]
and this later version with the black hex type knobs:
[Image: http://www.philcorepairbench.com/images/16Xlate.jpg]
The switch on the side is the QAVC on/off switch; see PHILCO SERVICE HINTS & TIPS - NUMBER 24
Model 16 and 17 Q-AVC Adjustment & Operation
The old antenna coupler screwed inside the console is from a Philco antenna system that used an outdoor dipole antenna with a balanced, twisted-pair lead in.
Chuck Schwark,
The Philco Repair Bench
[Image: http://www.philcorepairbench.com/images/philog3tiny.gif]
http://www.philcorepairbench.com
