Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Into the fray with a 116X
#11

I've replaced all the caps and all the electrolytics except the 4 small buggers inside the small can. As I went along I brought it up on the variac and tested it. Basically it sounds much like it did when I started except the hum is gone. At minimum volume she plays fine but as soon as the volume increases distortion appears and increase as the volume does. I swapped speakers with the parts set and there was no change. I'm hoping it's those last 4 lytics, when they arrive in the mail, but I'm not optimistic.

Having read up on the damage water can do to the dial I decided to try DeOxit D5 on a small area. It worked great so I did the entire dial. It cleaned up very nicely.

A couple corrosion spots on the chassis but I'll live with it. More to come.

[Image: http://i863.photobucket.com/albums/ab191...16x-12.jpg]

[Image: http://i863.photobucket.com/albums/ab191...16x-13.jpg]

Larry


Messages In This Thread
Into the fray with a 116X - by rocketeer - 03-26-2012, 04:00 PM
RE: Into the fray with a 116X - by TA Forbes - 03-26-2012, 04:32 PM
RE: Into the fray with a 116X - by rocketeer - 03-26-2012, 05:15 PM
RE: Into the fray with a 116X - by rocketeer - 03-27-2012, 08:29 PM
RE: Into the fray with a 116X - by Arran - 03-27-2012, 08:39 PM
RE: Into the fray with a 116X - by rocketeer - 03-27-2012, 10:11 PM
RE: Into the fray with a 116X - by LASJayhawk - 03-27-2012, 11:14 PM
RE: Into the fray with a 116X - by rocketeer - 03-28-2012, 08:11 AM
RE: Into the fray with a 116X - by Chuck Schwark - 03-28-2012, 08:54 AM
RE: Into the fray with a 116X - by rocketeer - 03-28-2012, 07:56 PM
RE: Into the fray with a 116X - by rocketeer - 04-06-2012, 08:32 PM
RE: Into the fray with a 116X - by rocketeer - 04-12-2012, 06:12 PM
RE: Into the fray with a 116X - by TA Forbes - 04-13-2012, 08:47 AM
RE: Into the fray with a 116X - by rocketeer - 04-13-2012, 06:26 PM
RE: Into the fray with a 116X - by Chuck Schwark - 04-13-2012, 08:21 PM



Users browsing this thread: