Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1936 610 restoration
#1

Hi Guys!

Long time lurker, first time poster.

I picked up a 1936 610 recently (sigh, buried under a bench in a car port)

the chassis is about done and I'm working on the cabinet and I need a little advice. after the broken pieces were repaired it was all cleaned up.. I used a lighter walnut to stain the bleached sections and it worked out well.. but the whole front is about as dark as the outer portion should be. I used grain filler on the sides (walnut from mohawk) and it's Really dark. I'm thinking I'll need to use a pigment toner on the sides because all the nicks and dings, which are now filled with grain filler. the front looks decent enough to use a dye toner on.. I'm looking for some advice on which colors to use. my local hardware store carries the entire line of mohawk everything.. so obtaining it is easy.

[Image: http://farm9.staticflickr.com/8241/84675...6675_b.jpg]
P1000757 by bfrohwein, on Flickr

[Image: http://farm9.staticflickr.com/8234/84664...a6c0_b.jpg]
P1000756 by bfrohwein, on Flickr

second question is about decals.. Does anyone know which decal set from Radio Daze I should order? I orderd a DCL-PH1 but I'm not sure if the three philco decalls on the lower left are the correct ones or not.

DCL-PH1 @ radiodaze

any info any might have would be appreciated!

Thanks again

Bret


Messages In This Thread
1936 610 restoration - by bfrohwein - 02-12-2013, 01:14 AM
RE: 1936 610 restoration - by Ron Ramirez - 02-12-2013, 11:33 AM
RE: 1936 610 restoration - by Ron Ramirez - 02-12-2013, 12:00 PM
RE: 1936 610 restoration - by Steve Davis - 02-12-2013, 02:37 PM
RE: 1936 610 restoration - by bfrohwein - 02-12-2013, 02:53 PM
RE: 1936 610 restoration - by Ron Ramirez - 02-12-2013, 03:42 PM
RE: 1936 610 restoration - by bfrohwein - 02-12-2013, 08:10 PM
RE: 1936 610 restoration - by Steve Davis - 02-12-2013, 11:10 PM
RE: 1936 610 restoration - by bfrohwein - 02-17-2013, 11:36 AM
RE: 1936 610 restoration - by Ron Ramirez - 02-17-2013, 06:50 PM
RE: 1936 610 restoration - by bfrohwein - 02-17-2013, 08:33 PM
RE: 1936 610 restoration - by bfrohwein - 03-28-2013, 07:43 PM
RE: 1936 610 restoration - by TimC - 03-28-2013, 08:01 PM
RE: 1936 610 restoration - by bfrohwein - 03-28-2013, 10:22 PM
RE: 1936 610 restoration - by Ron Ramirez - 03-29-2013, 04:31 AM
RE: 1936 610 restoration - by bfrohwein - 03-29-2013, 08:51 AM
RE: 1936 610 restoration - by Chris Cusick - 03-29-2013, 04:24 PM
RE: 1936 610 restoration - by Art Hoch - 03-29-2013, 08:35 PM
RE: 1936 610 restoration - by bfrohwein - 05-30-2013, 03:15 PM
RE: 1936 610 restoration - by Art Hoch - 05-30-2013, 03:57 PM
RE: 1936 610 restoration - by bfrohwein - 05-31-2013, 01:22 AM



Users browsing this thread: 1 Guest(s)