Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Back to the Drawing Board
#4

Skyscraper, Codefox,

Thanks for the replies! I will definitely try resoldering the 75 cap. I will also try light tapping on the tubes and see if that induces the noise. I already recapped and cleaned the tone control and other switches when I had it on the bench the first time.

Something is going on with the radio. Performance is degrading noticeably since yesterday. I get no stations at all below about 850 or 900 on AM. Shortwave still seems to work though that is harder to tell because there isn't much on that band. I think something is going on (failing) with the oscillator. I will take it all apart (cry) and check things out over the weekend. I'm heading to K'town tomorrow.

Thanks again guys!
Jon


Messages In This Thread
Back to the Drawing Board - by PAradiogeek - 05-07-2014, 04:16 PM
RE: Back to the Drawing Board - by skyscraper - 05-07-2014, 05:10 PM
RE: Back to the Drawing Board - by codefox1 - 05-08-2014, 01:48 PM
RE: Back to the Drawing Board - by PAradiogeek - 05-08-2014, 08:21 PM



Users browsing this thread: 1 Guest(s)