06-11-2014, 02:12 PM
Well got back had to catch up on house stuff but started last night troubleshooting but had a hard time believing what I was seeing so here is what I saw.
Started on 6K7 RF.
The cap #2 .1mf is there
Resistor #36 2k ohms is there
Resistor #13 300 ohm is not in its place is a mica cap which I read as 300pf from L to R orange3 black0 and brown1 at the point of the arrow. I checked it on my meter and I get .001mf.
I have the same thing on 6K7 IF .
I changed both to 330 ohm resistors.
Now both of the mica caps have the arrow with the three colored dots on the back is type 800 Micamold, I do get .001mf on both and also get 350ohms which is confusing to this novice but it is pretty close to the right ohmic value. Are they being used as resistors?
Started on 6K7 RF.
The cap #2 .1mf is there
Resistor #36 2k ohms is there
Resistor #13 300 ohm is not in its place is a mica cap which I read as 300pf from L to R orange3 black0 and brown1 at the point of the arrow. I checked it on my meter and I get .001mf.
I have the same thing on 6K7 IF .
I changed both to 330 ohm resistors.
Now both of the mica caps have the arrow with the three colored dots on the back is type 800 Micamold, I do get .001mf on both and also get 350ohms which is confusing to this novice but it is pretty close to the right ohmic value. Are they being used as resistors?
