Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

RCA 28x5 help
#1

Can anyone tell me if the speaker in this radio has been changed?  I see red paint and it looks like there's a nut missing from one of the mounting studs.  Any help is appreciated!
Steve
[Image: http://www.surfacezero.com/g503/data/500...5_rear.jpg]
#2

That is a fine radio Steve. I have a 28X5 and I love the dial as well the sound of that set, tone control is nice feature, almost a console chassis in that baby.

The 28X5 came from the factory with a 9 inch Ellipticon Speaker. It has an odd shape and is an ellipse though fatter on one end. It has the same red paint though. With my bifocals the speaker in your set seems more oval, maybe a change in production, or a swap by service tech with a similar RCA speaker? Look carefully and see if there is an outline against the grill of what the original may have been.

You will enjoy it.


Paul 

Tubetalk1
#3

Paul,
Thanks for the help. I haven't bought the radio yet, but want to. Hoping the speaker is original.
Steve
#4

Looks more like mine, I had to refresh my memory. I shot some photos today. It looks good however never found a decal set for it so I work from memory.

https://www.flickr.com/photos/92577012@N...5911715392

I had to lose the photo finish on the two columns that adorn the front.

Paul

Tubetalk1
#5

Paul,
Looks nice. I like that this set is big and brawny. I'll do a GoJo and polish cleanup treatment on the cabinet, ala Kirk, touch up the photo finish on the columns and enjoy looking at it. Thanks again for your help!
Steve
#6

(03-18-2016, 03:32 PM)Paul Philco322 Wrote:  Looks more like mine, I had to refresh my memory. I shot some photos today. It looks good however never found a decal set for it so I work from memory.

https://www.flickr.com/photos/92577012@N...5911715392

I had to lose the photo finish on the two columns that adorn the front.

Paul

That is one sweet radio!  Steve, from the photo's they look to be the same.  Go get it!  Joe

Joe

Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
#7

Joe,
It's bought and paid for. Now to wait until it arrives.....

Thanks to all who gave helpful advice!!
Steve
#8

Well, I got the radio. The seller didn't want to listen to me about any packing hints and now the radio is damaged. I posted an ad in the wanted section for a nice original one. Made me sick to see this happen, but I tried my best to suggest measures to get it here without any damage. Guy was made of Teflon and deflected any attempt to do so. Here's hoping i'll find another good original one.........
#9

Sorry to hear about that. Another damaged radio because of incompetent packing.
#10

(03-26-2016, 05:29 PM)SteveG Wrote:  Well, I got the radio.  The seller didn't want to listen to me about any packing hints and now the radio is damaged.  I posted an ad in the wanted section for a nice original one.   Made me sick to see this happen, but I tried my best to suggest measures to get it here without any damage.  Guy was made of Teflon and deflected any attempt to do so.  Here's hoping i'll find another good original one.........

 Time to file a claim then, your suggestions for sound packing practices may not sink in but a financial penalty will. Make sure you take pictures of the box and packing materials as well as the damaged set.
Regards
Arran
#11

Arran,
Did that Friday. Just waiting for him to accept the return and eBay will email me a label to return it.
Steve




Users browsing this thread: 2 Guest(s)
[-]
Recent Posts
Jackson 715 not working
Mrfixr55, its working now. I cleaned the switches and sockets with spray cleaner. Thanks for helping on this one.daveone23 — 06:26 PM
Jackson 715 not working
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM
HiFi (Chifi) tube amp build - but my own design.
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM
Jackson 715 not working
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM
Restoring Philco 37-604C
Yep. F5 is green, D5 is Red. Red is Bad. Green is Clean.morzh — 01:30 PM
Jackson 715 not working
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM
Restoring Philco 37-604C
(Insert Homer Simpson "DOPF" Here.) When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM
Philco 91 Speaker Replacement
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil. It wo...morzh — 08:44 AM
Philco 91 Speaker Replacement
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM
Philco 91 Speaker Replacement
As Rod said, it is OK to use a fitting speaker, and then look for an original one. If you buy a Hammond 125 output tr...morzh — 08:15 AM

[-]
Who's Online
There are currently 5199 online users. [Complete List]
» 1 Member(s) | 5198 Guest(s)
Avatar

>