Posts: 70
Threads: 17
Joined: Jan 2006
City: Newbern
State, Province, Country: Tennessee
I have a Philco for which I can't find any info on. It's a tombstone. It's about 19" tall with 2 small steps in on the sides 2/3 the way up. Two toned. Has 5 knobs with 2 being the tuning. 0ne inside the other. 4 bands, a shadow meter for tuning and 6 tubes. Any info would be great
Thanks, Richard
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
From your description, it sounds like a 144B.
--
Ron Ramirez
Ferdinand IN
Posts: 70
Threads: 17
Joined: Jan 2006
City: Newbern
State, Province, Country: Tennessee
Thanks for the info. Are these rare? Do you know where I can find pictures and info? The only pictures I find are of a 144b cathedral. (rounded top) not flat like mine. Thanks, Richard
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Eventually (hopefully by spring) I'll have photos on my website. Meanwhile, you can probably find a picture of one here:
http://www.radioatticarchives.com/
Info? Please specify what kind of "info" you seek and one of us can answer you right here.
--
Ron Ramirez
Ferdinand IN
Posts: 70
Threads: 17
Joined: Jan 2006
City: Newbern
State, Province, Country: Tennessee
Hi, No luck at the sight. Just the cathedral 144b. The dial cord is broke and the rubber tuner mounts are shot. I'ld like to know if there is picture or info on the dial cord routing also whats the best thing to use to center and isolate the tuner from the chassie. Thanks, Richard
Posts: 337
Threads: 15
Joined: Nov 2005
City: Ortonville, MI
I have a reprint of Philco's dial drivearrangements, but you're totally out of reach by e-mail, so I can't send it. Too bad!
Posts: 70
Threads: 17
Joined: Jan 2006
City: Newbern
State, Province, Country: Tennessee
Doug I activated my e-mail. Thought Idid that before. If you could e-mail me the dial schematics that would be great. Thanks again, Richard
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Okay, Richard, here's a pic of the 144B tombstone:
[Image: http://i326.photobucket.com/albums/k420/...i_144b.jpg]
(Photo credit: Peter Bertini)
This is a nice one, yes?
--
Ron Ramirez
Ferdinand IN
Posts: 70
Threads: 17
Joined: Jan 2006
City: Newbern
State, Province, Country: Tennessee
Ron thats it. It is a beauty. Thanks for identifying it for me. Now it will be alittle easier to find schematics and stuff.
Posts: 337
Threads: 15
Joined: Nov 2005
City: Ortonville, MI
Reprint from the Philco dial sheets is in e-mail now.
Posts: 70
Threads: 17
Joined: Jan 2006
City: Newbern
State, Province, Country: Tennessee
Thanks Doug, I really appreciate it. I guess it's off to Walmart to get the cord. Hopefully I'll have it working tomorrow. I don't want to be a pain, but I have alot of Philcos and other prewars needing various things. I've been doing ok on my own since most people around my area enjoy looking but are clueless on how tube radios work. It makes it alot easier to fix finding information from knowlegeable people. To me there is nothing better sounding then my 40-216. Also being 39 people think I'm odd. You know born to late. Thanks again, Richard
Does anyone know the wattage of the bc multi wirewound resistor in the Philco 87 and also can slightly higher values since I can't find a 640,157 or a 3785 ohm
Users browsing this thread: 2 Guest(s)
|
Recent Posts
|
Jackson 715 not working
|
Mrfixr55, its working now. I cleaned the switches and sockets with spray cleaner. Thanks for helping on this one.daveone23 — 06:26 PM |
Jackson 715 not working
|
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM |
HiFi (Chifi) tube amp build - but my own design.
|
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM |
Jackson 715 not working
|
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM |
Restoring Philco 37-604C
|
Yep. F5 is green, D5 is Red.
Red is Bad.
Green is Clean.morzh — 01:30 PM |
Jackson 715 not working
|
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM |
Restoring Philco 37-604C
|
(Insert Homer Simpson "DOPF" Here.)
When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM |
Philco 91 Speaker Replacement
|
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil.
It wo...morzh — 08:44 AM |
Philco 91 Speaker Replacement
|
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM |
Philco 91 Speaker Replacement
|
As Rod said, it is OK to use a fitting speaker, and then look for an original one.
If you buy a Hammond 125 output tr...morzh — 08:15 AM |
Who's Online
|
There are currently 3906 online users. [Complete List] » 1 Member(s) | 3905 Guest(s)
|
|
|
|