A trimmer adjustment tool.
Posts: 15,495
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
http://www.ebay.com/itm/1930s-PHILCO-RAD...7675.l2557
I recently found this on eBay and bought it.
I have been looking for something like that for a while. The insulating sockets I found cost so much (in hundreds ) it is not funny. The one I made by shaping a softened by heating body of a ball pen after a suitable size nut, is not that good, works on those trimmers that are freely rotated, not on those that need some effort.
This guy's idea is pretty ingenious and well executed. And for $13 and free shipping I think it cant be beat.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 09-08-2016, 03:09 PM by morzh.)
Posts: 5,070
Threads: 269
Joined: Nov 2012
City: Bandon
State, Province, Country: OR
Here's how I made a similar one a few years ago and posted it on the Phorum....
http://philcoradio.com/phorum/showthread...8#pid52048
Posts: 15,495
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
Bob
And I was thinking of doing the same. But then I needed to 1) find and buy the nylon screws, 2) get a dowell, 3) what is drilling? Does it hurt? ......
So when someone did all that for me for 13 bucks....I could not resist.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 5,070
Threads: 269
Joined: Nov 2012
City: Bandon
State, Province, Country: OR
Yes, I agree! I'd probably buy it now too, but he wasn"t selling them when I made mine. His are prettier than mine also.....
Posts: 15,495
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
No, he wasn't. It's a recent thing. A few months.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,102
Threads: 77
Joined: Jan 2014
City: Annapolis, IL
Thanks Mike!
If I could find the place called "Somewhere", I could find "Anything"
Tim
Jesus cried out and said, "Whoever believes in me , believes not in me but in him who sent me" John 12:44
Posts: 5,070
Threads: 269
Joined: Nov 2012
City: Bandon
State, Province, Country: OR
Posts: 15,495
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
This is why I decided to buy it then - I figured it would happen sooner or later.
I think he is testing it, if it sells still, he will keep it, otherwise it will go back.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 09-12-2016, 01:51 PM by morzh.)
Posts: 1,102
Threads: 77
Joined: Jan 2014
City: Annapolis, IL
I got one coming. Yup, price went up. Still not bad. Takes work to make then eBay fees etc. Wish I'd known sooner tho.
If I could find the place called "Somewhere", I could find "Anything"
Tim
Jesus cried out and said, "Whoever believes in me , believes not in me but in him who sent me" John 12:44
Posts: 1,102
Threads: 77
Joined: Jan 2014
City: Annapolis, IL
Just found out Tom is discontinuing making these. Looks like he has one left as of this writing. Maybe if some of us ask, he will make some more.
If I could find the place called "Somewhere", I could find "Anything"
Tim
Jesus cried out and said, "Whoever believes in me , believes not in me but in him who sent me" John 12:44
Posts: 751
Threads: 91
Joined: Nov 2015
City: Jonesboro
State, Province, Country: AR
I just ordered one. Hope to have it this week, though it might be a while before I actually put it to use.
Blessings,
Jeff W.
Jonesboro, Arkansas
http://jeffsradios.weebly.com
God loves you as you are, not as you should be, because none of us are as we should be. - Brennan Manning
Posts: 4,653
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
For $14.95 it had better be one like one of the original ones made out of fiber, the ones linked to look kind of Mickey mouse in my opinion. Before I found one of the original style I used a 1/4'' nut driver wrapped in electrical tape, since it's only adjusting a nut on a trimmer cap. The only reason the tool has to be insulated is because the nuts on the IF trimmers often have B+ on them, inductance isn't really an issue.
Regards
Arran
Posts: 15,495
Threads: 543
Joined: Oct 2011
City: Jackson, NJ
Arran
Inductance is not an issue, you are right, the capacitance however is, at least sometimes. Depends on the socket. I also used my socket wrapped with insulating tape, made it work but it was no fun overall.
And, yes, B+ is an issue when adjusting the left side of an IF filter.
This one is not made of fiber but is as good, pretty sturdy and the fact it is all insulating material makes it electrically equal to fiber.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 1,102
Threads: 77
Joined: Jan 2014
City: Annapolis, IL
Mine showed up yesterday and it looks good, not just thrown together. Even the ends of the handle are beveled. I could make one also, but that takes time and some trial and error. I don't mind paying a little for something that has already had that done, and I can just grab and use when needed. Mike is right about the fact this if not just for those trimmers with B+. Anyone here that has ever done an alignment with a metal nutdriver knows how much fun it is to try adjusting a padder and constantly having to guess where it is set, then remove the driver just to find it changes each time. Sure, you can do it this way - but why fight it when you don't need to?
PS: I mentioned this phorum to Tom and he seemed to indicate if there is enough interest that he would be willing to tool up and make another run of these.
If I could find the place called "Somewhere", I could find "Anything"
Tim
Jesus cried out and said, "Whoever believes in me , believes not in me but in him who sent me" John 12:44
Posts: 457
Threads: 31
Joined: Sep 2009
City: Lapeer
State, Province, Country: MI
(09-14-2016, 12:32 PM)PhilcoPhan1936 Wrote: I just ordered one. Hope to have it this week, though it might be a while before I actually put it to use.
Jeff, There are only two reasons to buy tools immediately; either you need it or you might need it sometime.
Joe
Joe
Matthew 16:26 "For what does it profit a man if he gain the whole world, yet lose his own soul?"
Users browsing this thread: 1 Guest(s)
|
Recent Posts
|
Philco 39-116 radio and remote
|
Hi Brad,
Thanks so much for the info! Do you happen to have the specs for the PT-86 transformer? I did not find a lis...RichG — 04:32 PM |
Philco 269 - 444 FIVE VALVE VERSION?
|
Thanks Arran;
If your set has five tubes/valves then it could be an A537, V537, or a U527, then again it looks like s...ChasL0001 — 11:07 AM |
Philco 29 or 45
|
29 chassis has a shadow meter while 45 chassis does not. Shadow meter is part no. 27 in the 29 schematic. compare it t...klondike98 — 10:32 AM |
Philco 269 - 444 FIVE VALVE VERSION?
|
Sorry, Chas.
Re the burns, I broke my first TV at the age of 3. Between my electrical experiments :yikes: (My mom wa...MrFixr55 — 09:07 AM |
Philco 41-221 Restored
|
Thanks for the compliment Richard. The tenite grille is original. A few of the horizontal slats were slightly warped so ...RodB — 08:44 AM |
Philco 29 or 45
|
Hello, I have just received a Philco lowboy where the tube layout label in the cabinet says 29 or 45. There is no label ...dconant — 08:29 AM |
Philco 41-221 Restored
|
Mr fixr,
That is great news I would love to see repo grille !!
I too have a very similar Philco but my cabinet has fab...radiorich — 08:22 AM |
Philco 41-221 Restored
|
Hi Rod,
I always tell people that my scars give me character. :wink: Great job on the radio. Is the grille origi...MrFixr55 — 08:00 AM |
Philco 269 - 444 FIVE VALVE VERSION?
|
It looks like the PENDD61 valve/tube must have failed, so someone replaced it with the EBC33, which is a double diode-tr...Arran — 04:29 AM |
Philco 269 - 444 FIVE VALVE VERSION?
|
Hello Chas. Radiomuseum has information on both sets.
Thanks Gary, lots of good info there.
Perhaps we'll ha...ChasL0001 — 02:23 AM |
Who's Online
|
There are currently 2234 online users. [Complete List] » 2 Member(s) | 2232 Guest(s)
|
|
|
|