The list of my radio & TV collection!
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
I have a question about the capacitors in Peter's schematic in post #178, page 12, this thread.
I am familiar with pF, nF and uF...but "cm" (C3, C10)? What does that mean?
--
Ron Ramirez
Ferdinand IN
Posts: 572
Threads: 20
Joined: Nov 2014
City: Svalyava Transkarpatia
State, Province, Country: Ukraine
Good question . I am also looking for a convincing answer. I have one capacitor of 4.5 cm disk design and I measured its capacitance - it turned out about 3 pF. But I well remembered that I dropped it from a faulty receiver, where I changed it to a 47 pF capacitor and then the receiver started working. It is highly likely that it was faulty. Therefore, I have a version that the abbreviation CM is the same as PF, but it denotes ceramic capacitors.
(This post was last modified: 01-18-2019, 10:42 AM by RadioSvit.)
Posts: 15,691
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
It is my impression that for whatever reason they measured it in...."centimeters" ("cm").
1 cm is a CGSE system 1cm is the measure of capacitance and approximately equal to 1pF.
(I am a physicist and this is how I know. But I never saw anyone using it in electronics before, especially in the same sch where other caps are shown in "pF").
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 01-18-2019, 01:29 PM by morzh.)
Posts: 572
Threads: 20
Joined: Nov 2014
City: Svalyava Transkarpatia
State, Province, Country: Ukraine
It seems to me, Michael, that сm and pf are the same in the long terms. But the question remains - what is the difference between them?
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Русский: Я этого не понимаю.
Українська: Я цього не розумію.
--
Ron Ramirez
Ferdinand IN
Posts: 15,691
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Well...this is a sole sphere in vacuum capacitance. Sphere with the radius of 1cm has the capacitance of 1cm.
Only in CGSE and Gauss systems. Approximately equal 1.11 pF.
Now, in CGSM system 1cm is..... inductance. Approximately 1nH.
Just to confuse you more, the unit of resistance in Gaussian system is Second.
Ron,
It is not really complicated but if you want, read on CGS system and its magnetic and electrostatic versions.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 01-18-2019, 09:04 PM by morzh.)
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Fascinating.
Just remember, Mike, that the vast majority of us in this hobby fall into the "hobbyist" category rather than the "E.E." category.
--
Ron Ramirez
Ferdinand IN
Posts: 15,691
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Well.....I know. I will tell you even more, most EEs don't know that either.
I'm a physicist, so I do.
PS. I just tried to answer the question about the "cm".
Short answer: same as pF, or for Terry - mmF (or uuF).
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
(This post was last modified: 01-18-2019, 09:58 PM by morzh.)
Posts: 1,186
Threads: 49
Joined: Oct 2017
City: Allendale, MI
Mike, what branch of physics? I was a physics major in another lifetime. Then got into the church organ business. don't know if that was a good thing, though it served me well.
Rob
Posts: 15,691
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Rob
I was a physics major, specializing in solid state physics, but then I chose to go to the experimental/theoretical department as they had an electronics lab and I got a chance to do my diploma project in Electronics.
Again, it was another life
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Posts: 4,682
Threads: 51
Joined: Sep 2008
City: Sandwick, BC, CA
Mike;
I'm pretty sure that they refer to electron tubes in France as "Lampes" as well, at least that was the terminology they used for them back in the 1920s and 30s in their advertising. It kind of makes sense that they would call them lamps in the USSR, from what I remember the French were one of the Western European countries that the Russian Empire, and later the USSR, seemed to be on reasonable terms with. In fact France and Russia were both members of the "Triple Entente", along with Great Briitain, prior to WW1.
Regards
Arran
Posts: 61
Threads: 7
Joined: Aug 2018
City: Mason
State, Province, Country: OH
Ron's Mr. Spock bmp was perfect for this discussion.
I remember reading that Powel Crosley contracted engineers from GE and Westinghouse and other powerhouse electronics institutions for support on his 500KW Voice of America broadcasting project and I wonder if maybe a few (or more) of them had a European bloodline and they might have been schooled at a college that used those designations for circuits. Maybe they showed up in some of the Crosley schematics...
Or its just mind control - look at those schematics long enough and you will only buy Crosleys!
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Mike
I think you took offense where none was intended. I apologize if you did. The "Fascinating" was an honest comment, not sarcastic. It's what Spock would say on Star Trek when he made a certain discovery or encountered something he found interesting (and thus my comment, as I found this interesting).
P.S. You haven't caught up to my post count yet? Get busy, man!
--
Ron Ramirez
Ferdinand IN
Posts: 61
Threads: 7
Joined: Aug 2018
City: Mason
State, Province, Country: OH
And gentlemen if I may chime in...
I also had no intention to diminish a posted comment or observation. The Spock image simply brought me back to my adolescence and the days that I was glued to the rabbit eared TV watching Star Trek.
I welcome the input of any individual whose intellect or amassed knowledge blows mine away. The references actually reminded me of my awe of my favorite interstellar objects: neutron stars (black holes get all the publicity).
As far as my rewiring goes the power portion is done and working fine. Thanks again to Ron and Klondike for the assistance. Now I just have to figure out what to do with the 3 side terminal connections that the former owner was trying to do.
Onward through the fog...
Posts: 15,691
Threads: 551
Joined: Oct 2011
City: Jackson, NJ
Ron
I am yet to take offense at anything here. Especially from you.
I myself saw for the first time the CGSE units (or what I think to be a CGSE unit) being used in an electronic schematic.
Then again..... I'm not too old to claim to have seen it all.
People who do not drink, do not smoke, do not eat red meat will one day feel really stupid lying there and dying from nothing.
Users browsing this thread: 8 Guest(s)
|
Recent Posts
|
Jackson 715 not working
|
Mrfixr55, its working now. I cleaned the switches and sockets with spray cleaner. Thanks for helping on this one.daveone23 — 06:26 PM |
Jackson 715 not working
|
Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM |
HiFi (Chifi) tube amp build - but my own design.
|
What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM |
Jackson 715 not working
|
Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM |
Restoring Philco 37-604C
|
Yep. F5 is green, D5 is Red.
Red is Bad.
Green is Clean.morzh — 01:30 PM |
Jackson 715 not working
|
I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM |
Restoring Philco 37-604C
|
(Insert Homer Simpson "DOPF" Here.)
When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM |
Philco 91 Speaker Replacement
|
From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil.
It wo...morzh — 08:44 AM |
Philco 91 Speaker Replacement
|
My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM |
Philco 91 Speaker Replacement
|
As Rod said, it is OK to use a fitting speaker, and then look for an original one.
If you buy a Hammond 125 output tr...morzh — 08:15 AM |
Who's Online
|
There are currently 3916 online users. [Complete List] » 1 Member(s) | 3915 Guest(s)
|
|
|
|