Just bought a 39-55 today
Posts: 335
Threads: 50
Joined: Apr 2011
City: Apple Creek
State, Province, Country: Ohio
Just joined the phorum, been lurking around ARF for a few years.
I don't know what the heck I'm thinking but I just bought another Philco Mystery Control console today. It's a 39-55 it's in good shape and its complete. Someone has worked on it in the past since one of the Elec caps has been replaced and all the station light sockets are rubber banded together and sitting on top of the chassis.
The guy I got it from said he plugged it in and it has a hum, and when he saw the 80 (he pointed to the tube) tube start to glow he pulled the plug so hopefully there wasn't any damage done.
I'm currently restoring a 39-116 the big brother to this 39-55 so I'm completely immersed in crumbled rubber wiring... 
Check out the pics.
[Image: http://i1129.photobucket.com/albums/m501...AG0183.jpg]
[Image: http://i1129.photobucket.com/albums/m501...AG0187.jpg]
[Image: http://i1129.photobucket.com/albums/m501...AG0186.jpg]
[Image: http://i1129.photobucket.com/albums/m501...AG0185.jpg]
[Image: http://i1129.photobucket.com/albums/m501...AG0184.jpg]
Is the only difference between the 39-116 and the 39-55 the fact that the 55 only receives on AM, and the cabinet is physically smaller? The chassis looks like the 40-205 parts chassis I have.
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Hello and welcome. That is a nice-looking 39-55 you have.
You're a glutton for punishment, with two of those rubber-filled monsters to work on... 
I should talk, I have a 41-616, as well as a half dozen other Philco models with rubber-covered wiring, waiting for me to get to them.
You asked:
Quote:Is the only difference between the 39-116 and the 39-55 the fact that the 55 only receives on AM, and the cabinet is physically smaller? The chassis looks like the 40-205 parts chassis I have.
Basically, yes.
The 39-55 is similar to the 40-205 in that both receive AM only.
--
Ron Ramirez
Ferdinand IN
Posts: 2,128
Threads: 18
Joined: Oct 2008
City: Merrick, Long Island, NY
What a beutiful set. This will be a very nice performer!
Posts: 2,353
Threads: 92
Joined: May 2010
City: Clayton, NC
Hello, welcome to the Phorum!
Nice set!! Unfortunately the modern design and performance is coupled with the crappy rubber insulated wiring!! I nearly rewired the entire chassis of my brother's 41-285 last summer. It started as just replacing the power cord and a couple of components. But just touch wiires that were close to what I was working on and there goes the insulation.
Posts: 335
Threads: 50
Joined: Apr 2011
City: Apple Creek
State, Province, Country: Ohio
Yeah I know what you mean. Thats exactly what happened with my 39-116 started replacing E-caps and power cord and everytime you touch heck look at that rubber it falls off the wire.
Ill take some pics of the 116 chassis soon and post them up. It is a neat set.
Posts: 292
Threads: 17
Joined: Aug 2010
City: Yorkville IL
Welcome,
I have a 39-55 waiting to restore as well. I purchased it,along with the matching mystery control, from the grandson of the original owner and it was untouched. The wiring is a bugger, I replaced the motor Cap to get it operating and now need to come up with a temp. battery till I get the one from "Batterymaker". He fabricates replica batteries for the mystery control using modern replacement batteries in a box that fits inside the control. I ordered it in Feb. and am waiting.....waiting....  . Good luck and everyone here is good about answering questions, so feel free.
Glenn
Happily back in Illinois..not.
Posts: 270
Threads: 12
Joined: Nov 2005
City: Nashville, TN
Hi Keith, good to see you here.
I understand about that rubber wiring, and in some areas it can be almost impossible to get to.
I'll bet it will sound great when you're done. Take care,
Gary.
Posts: 335
Threads: 50
Joined: Apr 2011
City: Apple Creek
State, Province, Country: Ohio
Thanks for all the coments.
I have a battery from batterymaker for the mystery control i have. I have another control but the only thing
Left is the innards the case was destroyed by water i got it that way.
The rubber wiring can be a challange to replace but not to bad if you take your time
And take lots of breaks so you dont go insane. 
Posts: 335
Threads: 50
Joined: Apr 2011
City: Apple Creek
State, Province, Country: Ohio
Just thought of something.
All the station ID labels for this set for for Local Arizona stations. Would it be possible that this set was sold in AZ originally? Is there any way to track it by serial number to see what region it was sold in?
Posts: 13,776
Threads: 580
Joined: Sep 2005
City: Ferdinand
State, Province, Country: Indiana
Yes, if the call letter tabs are set to Arizona stations...then, most likely, it was originally sold in Arizona
On the other hand, unlike Zenith, no data exists (that I am aware of) for Philco serial numbers.
--
Ron Ramirez
Ferdinand IN
Posts: 335
Threads: 50
Joined: Apr 2011
City: Apple Creek
State, Province, Country: Ohio
Well that sucks they didnt keep track of S/N's.
Are there any records of the Philco distrubitors in Arizona back then, like names or addresses?
Did the big chains sell Philco radios back then like Sears, and Wards? I know Sears had their own line (silvertone right?).
Users browsing this thread: 2 Guest(s)
|
|
Recent Posts
|
|
Jackson 715 not working
|
| Mrfixr55, its working now. I cleaned the switches and sockets with spray cleaner. Thanks for helping on this one.daveone23 — 06:26 PM |
|
Jackson 715 not working
|
| Now that you posted the schematic, I don't know why that Sprague electrolytic cap is across the meter, as it is not indi...MrFixr55 — 05:51 PM |
|
HiFi (Chifi) tube amp build - but my own design.
|
| What may be lacking in the PP Tube amps may be the 2nd harmonics, which some, especially RCA back in the day called &quo...MrFixr55 — 05:32 PM |
|
Jackson 715 not working
|
| Usually in an emission tester, the tube under test is measured as if it were a diode. So, some testers connect all the g...RodB — 04:17 PM |
|
Restoring Philco 37-604C
|
| Yep. F5 is green, D5 is Red.
Red is Bad.
Green is Clean.morzh — 01:30 PM |
|
Jackson 715 not working
|
| I did start to do that but I stalled out because I could not figure out how the grid and plate get voltage. In this diag...daveone23 — 11:52 AM |
|
Restoring Philco 37-604C
|
| (Insert Homer Simpson "DOPF" Here.)
When all fails, look at the can. Took the Ron Ramirez advice, red Caig D...MrFixr55 — 09:23 AM |
|
Philco 91 Speaker Replacement
|
| From your text I am not sure if you intend to use the existing speaker with a resistor instead of the field coil.
It wo...morzh — 08:44 AM |
|
Philco 91 Speaker Replacement
|
| My field coil is bad. I am still hoping to find an original, but if I can't I will go with a fitting Philco speaker, 125...dconant — 08:34 AM |
|
Philco 91 Speaker Replacement
|
| As Rod said, it is OK to use a fitting speaker, and then look for an original one.
If you buy a Hammond 125 output tr...morzh — 08:15 AM |
|
Who's Online
|
There are currently 5293 online users. [Complete List]
» 2 Member(s) | 5291 Guest(s)
|
|
|
|
 
|
![[-]](https://philcoradio.com/phorum/images/bootbb/collapse.png "[-]")
